Paladin529

Yes HD

Anyone else having issues with getting these to shoot of a 1:9 twist barrel? I'm having a hard time finding a load. This rifle shoot 168gr berger vlds under half inch at 100. I'm just about ready to give up on these eldx

Where are you located?

Pm sent

Where are you located?

Bull basin archery

240 weatherby is a killer round loaded with 105s it's basically a 243 on steroids. Pics in the ad may help the sale. Just my 2 cents

How often are you guys cleaning your barrels? I don't like cleaning my barrel to often and believe a fouled barrel shoots better. I recently cleaned my fairly new barrel (around 300 rounds) with copper solvent and noticed my accuracy went out the door. Now I'm not sure if It's just me or the barrel. What have any of you seen with your experience?

Thanks guys. Ya guess I'll just keep shooting it and hope it tightens up before this season hunts. I like that guys videos too. Learned a lot from his long range shooting vids too. I see gunwerks using that wipeout I may give that a try next time I clean it. Came across this article in my research http://www.6mmbr.com/borebrushing.html You're right there is a lot of opinions on this matter and these bench shooters clean after every group. But I'll stick to maybe once a year cleaning.

It's a Krieger barrel lol.....anyways someone got a good deal on a custom rifle

Big or bust if you read above he answered one of your questions already

Wow good deal with that stock

Not even in the same category. The new swaro hd are hands down better

Sorry forgot the pic

That's as good as she's gonna get

$900 Firm These binos are in perfect condition.

Good point. I didn't think of that. I just know this ocw method has you focus on loads with same point of impact in relation to the target rather than group size. Then play with seating depth. The vertical stringing is a good point. I wish I had a chrony to see what the muzzle velocities were doing.

Just not working for me now LOL

I think you guys misunderstood I don't start shooting at max load . I load the sighters per ocw method for over pressure signs. I never start a load test with the highest charge. I go lowest to highest. That's just the way I get my loads for test, I get the max per the manual of bullet I'm testing and load down go to Dan Newberry's website his method works very well

Ya I was just following Dan Newberrys OCW method. He actually has you go over the max load in his method. I didn't want to do that. I want max velocity so I don't bother with lower charges. If I can't get them to shoot I'll probly scrap em. I've used this method for a few years with excellent results out of accubonds and Berger vlds

Yes 3 rounds for each powder charge @ 62.9 and working down from there

Started at 62.9 gr worked down in .3 increments to 61.4, cci 250 primer, Norma brass, 2.731 base to ogive that's .020 off lands. Just bumped up too .015 off lands and gonna see what I get

Here's an ocw I did using RL22. I chose load from target 2 since those first three have same point of impact. Do you guys agree? I then loaded more at varying seating depths. I don't have pictures of that target but I got the same results on groups as before.

Sold