Nuter13 Report post Posted June 1 I have 3 factory tikka barrels for sale chambered in 7mm rem mag , 30-06 and 6.5 creedmoor . The 7mm is stainless 24 inch sporter rougly 250 rounds , the 30-06 is blued 24 inch sporter never been fired , the 6.5 creedmoor is a ctr semi bull 5/8x24 muzzle thread 24 inch it has 193 rounds down it . asking $175 for 7mm $150 for the 30-06 $250 for 6.5 Share this post Link to post Share on other sites
Freakycamo Report post Posted June 1 I am Looking for a 22-250. Share this post Link to post Share on other sites
Nuter13 Report post Posted June 1 I don’t have one of them sorry Share this post Link to post Share on other sites
Azshooter Report post Posted Thursday at 01:45 PM Information that can help OP sell his barrels: The threads on a Tikka's tenon is the same as a Ruger M77 and the push feed model 70s. ( 1"-16 TPI ) The tenon is a bit long so all that is needed is to machine off some length and run a reamer in to establish proper headspace. At the time of machining a larger reamer could be used. Did this with a 25-06 Tikka barrel. Put it on a M77 Ruger and rechambered it to 257 Weatherby, Think of the possibilities with those barrels! FYI Tikka barrels are hammer forged and are very smooth with no reamer marks. This is because the factory starts with a short and large diameter blank. The reamer marks get hammered out. 1 Share this post Link to post Share on other sites
