Jump to content
Sign in to follow this  
Nebraska402

Micrometer seating die ?

Recommended Posts

I need some help loading up some Berger VLDs for my 30-06.  I currently just have your standard rcbs die set.  What do I need to buy to micro seat these?  A whole new die or is something made I can screw into my current rcbs die?  Thanks for your help.  -Marshall

Share this post


Link to post
Share on other sites

I bought one a long time ago I think it was a redding maybe lyman(it was a odd name at the time) for my 300 winmag, wasnt a big deal to me.  too many variables in most loaders to worry about .005 seating depth as discussed in another thread earlier.

They do have dies made with them and some have addons.

if you know what your seating plunger threads are lets say 1/4-28 you can  figure it out with the set up you have. 1/28 = .0357 per full revolution, 20 threads per inch is 1/20= .050 per revolution. etc etc.

be cheaper just to get know how many threads per inch is the screw and us that

Share this post


Link to post
Share on other sites

It will come with the VLD insert for the bullet when you order.  This assures the tip is not bottoming out when you seat causing the bullet to be offset.  Call Redding or RCBS and tell them what you are loading, they will give you the exact part#’s or sell them to you. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×