codyhuntsaz Report post Posted September 29, 2020 7 hours ago, AzDiamondHeat said: As Curtis said, Your gas leak is most likely from the float valve not seating due to buildup from letting gas sit in the carb. seafoam could clean it but might need a carb kit if the little rings have hardened. very easy to do. You need to check that your differentials are not leaking from somewhere. That oil is very much like engine oil. Given the location it very well could be. Just track the fluid if you can. Fluid can run horizontal or along lines too. So it could be coming from something several feet away from where it is dripping. Engine oil leaks are not uncommon in old bikes. seals just get old. most of the time not worth rebuilding or even putting a new seal on. But for sure try to trace it. When you say the engines aren’t worth rebuilding or replacing the seal, is that due to cost? Share this post Link to post Share on other sites
AzDiamondHeat Report post Posted September 29, 2020 Just a lot of work for a little oil. Just be sure to keep your oil filled. A little oil doesn't hurt unless it is causing other problems. Share this post Link to post Share on other sites
