Kingzero

Glock large frame lower for your 10mm needs. http://www.quartercircle10.com/product/glock-large-frame-lower/

Went out this morning to see how my new 9mm AR worked on coyotes. I managed to put this stubborn female down at 148 yards because she wouldn't come any closer. The first shot sent her spinning and the second piled her up. It was farther than I wanted with a 1x Aimpoint ACO but the Hornady 135 Flexlock got it done. The dot is where I shot from.

My new varmint model gets delivered tomorrow.....would really like this out of the safe.

Brass trimming is a necessity. If you never trim your brass you could end up jamming the neck into the throat and essentially "crimp" the bullet in the case. This can cause hard chambering and high pressure. Trimming the necks won't affect powder capacity because you never fill up into the neck. Also, are you jumping 0.15" or 0.015"? Because 0.15" is quite a jump to start with if your not restricted by the length of a mag. If you have an accurate way of measuring the chamber, I would start touching the lands or 0.010" off. If you are seating 0.15" try loading them longer (if possible) and you might not get the powder crunch. And not to beat a dead horse...Retumbo wouldn't be my first choice for a 243. The velocity in that data is ok but with other powders you can get better. I shoot 105 Amax's in a 6mm Creedmoor (very similar) and get 2950 fps with a 20" barrel using H4350. If I had a 24" barrel like used for that Hoddgdon load data I could probably get close to 3100 fps.

Someone needs a fast 22......

Apache Junction.

Bump.

Grayboe Stocks is a newer company founded by Ryan Mcmillan (cofounder of Mcmillan Firearms Manufacturing) and Gregg Arthur that make fiberglass stocks using injection molding. They are sold on Gunstox.com and Red Hawk Rifles and apparently are licensed and approved by Mcmillan to produce the "Renegade" which is an A5 clone. They also have a ton of Mcmillan liquidation stocks for sale too. They only have 3 styles right now and inlet for Remington 700's only, but state that more will be added. They are getting good reviews and seem to hold up to the Mcmillan standard. Grayboe.com Gunstox.com https://redhawkrifles.com/products/catalog/grayboe-stocks http://www.scout.com/military/snipers-hide/forums/5514-bolt-action-rifles/14770815-gray-boe-stocks

Well, guess I was wrong....just got a response. Chris, Thank you for you interest. Grayboe is planning on offering the Tikka in the future, however, the nature of the production process does not allow for customization. It will be some time before the expansion of the current line due to manufacturing and tooling constraints. Please let me know if I can answer any other questions. Best Regards, Ladd Hunter Gunstox.com

Wow, tough crowd. Didn't know this would turn into an action debate. For a new company the Remington 700 inlet is the wise choice....it's the most popular. If you go to the Gunstox website it says "New actions and barrel contours are continually being added on a regularly scheduled basis. If you desire a specific action or barrel contour, please contact us." It sounds like they may be able to inlet for other actions but are focusing on the 700's to sell immediately. Being a Mcmillan, and licensed to produce A5 clones...I imagine they have all the inlet info they need. I just emailed them asking about a Tikka inlet. Ill post their response when I get it.

2 Magpul MOE stocks for sale. One black and one FDE......both Milspec tube size. SOLD. They are new. I bought and installed them, but then decided to use the CTR stocks. Located in Apache Junction.

I have a like new (50 rounds) Tikka T3 that I will sell. It's a blued version with sporter barrel. I just bought it two weeks ago from Sportsmans but want one with a longer barrel. I would take 525.00 for it.

Worms gotta eat too.

Unless you find someone to sell you a land owner tag.

Last Wednesday I picked up a new Tikka in 22-250 and took it with on a family trip. We went to a friends ranch for fun and relaxation and ended up painting a barn and an old bunk house....go figure. We did however, manage to get the rifles out and put the smack down on some Prairie Dogs.....and this 22-250 is a hammer. I shighted it in at 100 yards with 5 rounds and the sixth smashed a dog at 270 yards. I pretty much ignored my custom 6mm Creedmoor because this Tikka was so much fun. It seems to be just as accurate as my 7mm superlite. Some carnage.....

FTE and FTF with a G33 9mm conversion and threaded G17 barrels.....with all kinds of factory and my reloads.

I have had problems with the 2 Lone Wolf barrels I have owned. Others say they work but I won't give them any more money. I bought a Silencerco threaded barrel for my G17 from Mr. Silencer (Bruce) and it has been flawless.

I use one of these on a Tikka. Works great but I had 3 rounds of 7mag fall out of the loops while hunting. https://www.triadtactical.com/Triad-Stock-Pack.html

Tim at Arizona Custom Machine He is off Gilbert and Houston...great guy. 602 568 9680

Daym!

Bugholes.com says 30 days for Savage prefits on in stock blanks.

Selling my Benchmade 300 axis flipper with 154cm blade. Great condition......don't have box anymore. Sold

Looking for a good condition gen 4 Glock 17. Let me know what you have. 602.354.6218 Chris.

These are extras that I acquired over time and decided to move them along. I did a Kryptek type cerakote on them in Magpul FDE, Noveske Bazooka Green and a custom mix with the first two colors and black. Lower is an Olympic Arms. Upper is a Yankee Hill Machine Handguard is a Yankee Hill Machine Todd Jaret 9". All are in great condition and have low round counts. SOLD. Trade for a gen 4 Glock 17. Located in Apache Junction.

Up.....trade added.