iflyskyhigh

Bump

Hopefully I didn't waste all my time processing this stuff. I built a custom .308 and have moved to Lapua brass (not sure it was worth it, but oh well) It's ALL LC, but various years. This is not range pickup. It is once fired military and LE brass. It was purchased from a reputable dealer. I've been using brass from this dealer for the better part of a decade. I used this brass to shoot sub 3/4 minute groups from a stock Savage 10 FCP SR all day every day. Granted it took me a ton of time and money in components to get there, but this brass will make sub MOA loads all day. I loaded them hot and got anywhere from 8-10 firings before the necks started to split and got case head separation. Needless to say, it's thick, heavy brass. The brass I'm selling is the remainder of my "unused by me" supply. It's fully processed and guaranteed to fit in any firearm. When I received this brass this is how I processed it before my first firing. My process is: Deprime Primer pockets checked Swaged on a Dillon Super Swage (As needed) Wet tumbled Dried Annealed on a Mike's Reloading Bench Annealer Resized on a Dillon 650 with an RCBS Black Series Small Base Die to min SAMI spec Trimmed on a Henderson Precession Trimmer (Trimmed, Chamfered, Debured) Tumbled in a propriety combination of walnut and corn cob media Flash holes double checked All you need to do is: Load Shoot Rinse and repeat I have handled and examined this brass multiple times during the process. As such, I'm 99.9% sure there is nothing but the quality LC Brass I have described in this lot, but because I'm human their will be a minimum of 5% extra brass included with each shipment to make sure you don't get shorted and account for any mistakes I made (even though I don't make mistakes) Now that that's out of the way: I have 900 pieces of brass total and I have broken the lot down into 100 piece units. All prices are shipped and remember you will get at least an extra 5% with each order (and probably a couple more) 100 Pieces ($0.70/each) 500 Pieces ($0.65/each) All 900 Pieces ($0.55/each)

New opened package. 30MM 1" height Asking $100 . Prefer face to face.I'm in Northeast Scottsdale, AZ. Will ship for $12 Price Drop $70 shipped

Sold. Thank you

I purchased several pairs of Medium 1.00" NF Rings for some builds in conjunction with NF ATACR 7-35's, and didn't think about the fact that with the straight barrel profile the bell would be a little closer than I'd like to the barrel. It clears, but it's a little lower than I'd like it to be. I've used the Medium rings with the 7-35 ATACR on my other builds and it was perfect, but those barrels have a slight taper to them. I have three pair: 34MM 6 Screw FDE X 2 (Both new unused. One package opened and one sealed) $175/each shipped 34MM 4 Screw Black (New opened package) $140/shipped I really only need 2 sets in the end but somehow ended up with three. If you have some High 1.125", I'd be wiling to trade. Let me know what you got

All sold. Thank you

If you're looking at it you know what it is and what it does. I have 2. One new. One used. New one has everything is came with. Used has plate and mounting hardware, no bits. New is $50 Used is $40 Shipping $5

Bump

Bump Still looking for two sets of NF 34MM 1.125" rings

Bump

Hey. Sorry for the delay in response. Life.... I think I will pass on the trades for now. Really just looking to sell. Only thing I'd be interested in for partial trade would be 2 sets of NF 34MM 1.125" rings

Not really looking for anything right now… Don’t need any brass. What did you have in mind?

Bump trade towards NF Ultralight Rings 34MM 1.125” X 2

Bump open to offers trade towards NF Ultralight Rings 34MM 1.125” X 2

Bump open to offers

Bump Still for sale at $70/shipped

Bump Price Drop 100 Pieces ($0.70/each) 500 Pieces ($0.65/each) All 900 Pieces ($0.55/each) Remember. You’re getting an extra 5% so the price per piece is actually lower than what’s listed. The more you buy the more you get. The more you save. I think I have about 965 pieces total. Buy all 900 and you get approximately 965 pieces for the price listed.

2 for $10 shipped Have 12 Most have never been used

Anyone still using Lee?

I know someone has a 300 BO bolt gun they need this for

I have: .223 sold .308 sold 30-06 sold 300 BO $20

works good lasts long time

Bump $70 shipped

I know everyone is throwing their sigs in the trash but this is available

Used on my M17. Works great last long time. Switched to a the Sig Remeo X Pro so this is no longer needed. Comes with the mounting screws for the M17. You will use your RMR or Holosun screws for mounting the optic. Make sure you read the directions on the website if you are mounting a Holosun. Basically the short screws are too short and the long screws are too long. You have to file the long screws down to get the proper fit. $95 shipped or $90 FTF I'm in North Scottsdale, AZ