MULEPACKHUNTER

Anyone have experience moving silver dollars? The little research I’ve done is all over the map. I have some 90% silver dollars.

Couple of groups from today. Shot about 24 rounds all under 1” at 3034 fps with Es of 10. 18.5 barrel 175 federal fusion. some groups got lost in the testing, long day of testing repairs and new barrels.

Came across some good deals on parts and decided to put another one of these together. Shooting some paper next week to see how she does. lightly used 7mm 1:8 barrel cut down and rechambered at 19” long and added 5/8 24 4 port Ti brake. Timney trigger 1.4 lbs Rem 700 trued and lapped with .250 lug, scope base and action bedded to MDT chassis with 3 rnd mdt 30/06 mags cip length for those 195 bergers. Weighed in at 11 lbs no scope right where I like em. Planning to test with Can as well putting the over all length under 26in with can.

No , MPA one piece mount.

Testing time. Little lightening and paint left to do but looks pretty sweet as it is.

Whats all that green stuff, welcome back and congrats

Very nice

You could build one also? I have a couple 6.5 barrels, couple short actions, late model timney trigger. (actions are a bit heavy but good

Brand New 28 Nosler for sale 3400.00 shot one group of 3 and 2 shots to zero everything in pic minus scope and rings and tripod (Built By Aark Machine Wittmann AZ) weatherby 307 action HS precision stock timney trigger wyatts box and shoe precision bottom metal (bdl) custom 4 port Aark Machine brake Bartlien 8 twist carbon barrel at 24 in custom bolt knob 20 moa base 8-40 screws Action bedded 4 in arca at floor plate picitiny rail at front mdt carbon ground pod mounted 9 lb 7 oz without scope 1 box of nosler ammo goes with Cash or card for payment Consider making changes to the stock and adjust price or willing to sell as a Barreled action with or without the bottom metal. Swap to stock of your choosing or barreled action. Really considered swapping to the MDT Carbon but they are out of stock at the moment.

Ya Ive seen commercial guys skinning with that style

Im doing load tests shortly on this, I also have a 7mm Backcountry just finished I'll be testing that one as well.

TBAC RR (I make a flat conversion for this so best of both worlds) Yankee Hill Bad Larry Dillon Rifle is coming out with a printed Ti 30 cal as well. I believe based off a tested 50 cal rated can. Their new micro venting is really slick.

Boarman is a salesman

I used to get mine from imperial trailer sales, really good guys to deal with but that was 10 years ago.

He said he doesn't need help selling so your friend is out.

Crazy

New never fired Springfield 2020 rimfire 22LR with 3 ten round mags. Pic base included. $399.00 located west valley in Wittmann.

bump

bump

Blue camo TP9 with box and paperwork, 3 mags, speed loader, cheap holster. 350.00 wife’s daily carry in purse, good shape, 300 rnds fired. west valley or meet by sky harbor in phx.

bump

Do you guys like that action? New build coming up and that was one of the options but I’ve not handled one. thanks

This goes back to a post I made a few months back, you have to understand where these scopes are made, when your in the under 500.00 dollar range you get China, with all the brands if your not in the American or Japan made price range you get mass produced products all coming from the same few factories in China most likely. No one can make a scope that’s decent for a low price, zero compromise named theirs right. Quality is top notch but your not getting it for 599.99

I can say that the Mark 4 and Mark 5 I own are perfect on tracking out to 800 real world use. I will post when I get them in the test board.