MULEPACKHUNTER

Whats the dates?

2012 tracker pro for sale. upgraded 75 horse optimax Merc upgraded 24 volt 65 lb trolling motor upgraded sonar well kept with normal cosmetics (top of seats cracking) serviced regularly, lower unit and water pump done last year 13,000 firm

What you want to spend, I can build you one. I have a proof barrel and HS stock. Can blueprint a 700 action

He pays less percent than his secretary but he pays millions in taxes so no he doesnt pay less taxes

Anyone have any experence with PTG or other carbon sleeved Bolt?? Looking for how the wear has been after shooting for a while?

Wish it wasnt featherwieght id snag it, Carbon six carbon barrels pretty good so far.

Filson Tin is best there is, Ive had one jacket for 20 plus years and still going.

Yes

I can order them if interested, Im on west side of Surprise. They are out of stock often.

I can vouch for these breaks. I have 2 and did some testing with ballpark 60% recoil reduction on my rifle 7 PRC.

Ill have to buy a tool for it but I can do it. shoot me an email. Im on the far west side of valley. Keep in mind if it doesnt shoot well or does with that round your stuck with it. As in if it shoots well it likely wont shoot well with factory or shorter rounds Mhughes@aarkmachine.com

I use these for donor actions, stop by pawn shops..or check used section at cabellas or even gun broker has some deals if you have time to bid and track. Easier to find cheap gun than just action

How about pushing the freebore out on your current rig for the 7 mag?

ILL TAKE IT

Sale pending,

Green color Bag only for sale, used on 3 trips no issues. 100.00

100 BUCKS BUMP

BUMP

70.00 BOX ,,HAVE 7 BOXES. Can meet anywhere between Sky harbor and wickenburg on weekend afternoons, or Near Surprise AZ durring the week.

I take that as a no?

IF YOU WOULD SPLIT I would be interested in the 10x14 dual screen door only

DONT WOULD BE MY ADVISE, (YODER YS)

gage pin can be had online that is large enough but you will need to know what your current diameter is, ill get you a good size when i get to the shop, Ill make sure it fits through the prime tool aslo, not sure how much room is in there but fell like it has plenty.

You could always crimp the pocket prior to loading primer. Light crimp would be easy to achieve by hand. oversized pin in your hand prime tool and giver light press until it tightens up the top of the pocket.

WICKENBURG