MULEPACKHUNTER

100 BUCKS BUMP

70.00 BOX ,,HAVE 7 BOXES. Can meet anywhere between Sky harbor and wickenburg on weekend afternoons, or Near Surprise AZ durring the week.

BUMP

I take that as a no?

IF YOU WOULD SPLIT I would be interested in the 10x14 dual screen door only

DONT WOULD BE MY ADVISE, (YODER YS)

gage pin can be had online that is large enough but you will need to know what your current diameter is, ill get you a good size when i get to the shop, Ill make sure it fits through the prime tool aslo, not sure how much room is in there but fell like it has plenty.

You could always crimp the pocket prior to loading primer. Light crimp would be easy to achieve by hand. oversized pin in your hand prime tool and giver light press until it tightens up the top of the pocket.

WICKENBURG

New in box Charter Pitbull 9mm 480.00 cash. FREE 4473 required. Located west valley near surprise. Great Ladies carry pistol, no moon clips, light recoil.

set of 5 Ram 2500 Wheels and tires with lugs and socket as well as sensors. wheels are in good shape just dirty. 1 chrome spare. Nitto Terra Grap tires not great shape. 295-60-20 size. 900.00 DELIVERED NEAR PHX

IF YOU BUY THE ACTION SIDE ILL SWAP IT AND KEEP THE WRENCH????? WRENCH = 50.00 PLUS SHIPPING Granted Howa is known to be the worst factory removal known to gunsmiths

i have a vise i can sell, 400.00

A little slow this year but brought a few home. Water temps were low and captain was having tough time finding warm currents. Really big water first day, half the boat was yacking. Almost all blue and yellow fin. Used spin set up this year and had a blast on that.

You buy the reamer and I can set that up for you. Going to be mid september on schedule. Let me know. Pretty sure I dont have that tool but Ill check Mhughes@aarkmachine .com

AH BUMMER

WHERE they located?

EZ green is perfect. I built my own off of that design.

I had trouble with 2 out of three lowers pin holes not in correct location. but I corrected issues and they work fine.

BUMP

bump

bump

IDE BE INTERESTED IN JUST THE FRAME AND ATLAS???

Finally got 7mm PRC reamer in , really popular right now. lots of 30 and 6.5 as well.

I know of a few guys , Mhughes@aarkmachine.com