MT. CAT

Put me inline for it.

Straight body or angled? Silver or green body?

Sweet pics!

Nice work!

For sale 1990 starcraft 12' pop up camper. I would call this a hunter special. I have pretty much removed all cabinets. sink, refrigerator, from the interior to allow for gear storage. More pictures to come. Just got it out of storage today. Asking $1500. Call me @ 602-703-9979 Mike D 12' box 1 queen bed, 1 full, 1 twin/table bench All beds recovered in heavy canvas predator camo (looks sweet) 14k BTU furnace blower motor replaced in January and used once after repair 12.5k BTU window a/c unit installed in rear of camper. I have used this in Aug in bear country, camper got down to 76* in middle of the day Tires have good tread I repainted the exterior gloss white and frame gloss black and got rid of the pin stripping All window come with heat reflecting material ( just like your windshield thing) Both bunk ends come with the same reflecting material. Great at keeping the heat out in summer/ keeps the camper warm during winter. Dual propane tanks with new regulator Group 31 deep cycle battery. lasts over 4 days running furnace all night long on the winter trips No leaks during heavy rains. Had 4 inches of snow on trip with no problems 10' awning Spare tire Cons Canvas has a few stains nothing major A few zippers are worn but still work rear passengers side bumper is slightly bent awning bag zipper broke ( i just set it inside during transport)

I use to live in Chandler Alma & Elliot. I now live over the canal off of Dobson & Guadalupe. I do need to get out and shoot my rifle a little more with the new scope. Only place I go is Rio Salado range. Probably 20-30 minute drive.

Nice fish.I'm down there often on Sunday evenings with my 6yo nephew. He slaughters the bluegills, I cant seem to pull in a bass yet. What kinda lures do you have success with? From that pic we usually fish another 100 yards east.

Im not the one you saw but I got these pics from a co-worker. Email says taken New Years Day 2009 just north of Athem. Looks like you can patio hunt your neighborhood!

I give up. Been calling since Friday afternoon, still cant get through!

I've been trying all night. Right now I got all circuits are busy message.

YOUR ONE SICK AND TWISTED INDIVIDUAL!!!!!!!!!!!!!

Are they auto or manual shift?

Arizona just made MSN.COM homepage with a link to the story. Now the whole world will be reading up on this. " Oldest jaguar in us is DEAD" Its gunna get ugly.

Anyone think this will make national news? Last known jaguar in USA dies after capture. VERY VERY SAD!

I agree with coues7. There are numerous articles on the 700 trigger. Just google rem 700 trigger job. I read a dozen or so all with the same detail on how to properly and SAFELY do the job. I don't know the exact pull weight of mine, but I do know its alot less than before. It did also take alot of the creep out of the trigger, breaks real nice now. I live right by the Guns Etc in Chandler. I went there once to talk about doing some work on my Rem 700. Wow what a bunch of idiots. All they did is question every thing I wanted to do to the rifle. You figure a gun shop that advertises gunsmithing would want my business to do some gunsmithing So I went home and did it myself.

That would be me. Im usually doing mach5 to make it to work by 6. Hope I didnt cut you off. Does your ride have a sticker. I've yet to see one. Did see a guy with a plate COUSEAZ or something close, he gave me the heads up, but no sticker.

I own the Gatco professional kit, and love it. It just takes time and some patients to achieve a perfect edge. Everyone should read this article before ever sharpening a knife. http://forums.egullet.org/index.php?showtopic=26036 I still go back and read it from time to time to keep on point. I use the magic marker trick all the time to determine correct angles of a knife I have never sharpened. I also leave a small slip of paper in my kit with all the angles I sharpen to, even if there are a buddies knife. Trust me you'll forget and have to use the marker trick again. I don't use the oil with the kit. I prefer to let the stone do the cutting and clean it once I'm finished. The only thing missing in my eyes it the ultra fine stone. I plan on getting one some day, but I'm am very particular about how my knives are and feel while cutting. One last thing buy the pedestal mount makes life easier.

Congradulations Paul. Couldn't have happened to a nicer guy. Paul if you remember you stopped at our camp and chatted for almost an hour with us Mike, Brett, and Rick from West Virginia. I had the dodge diesel with the pipes in the bed. You also left us with your Colorado Bowhunters magazine. Guys this man is a stud in my books. He has some wild stories and does it all on solo no help from anyone! And all with the bow. We told you we were gunna be back the next weekend but never made it. I will be going down Sat. morning to the same spot. What a sweet buck! Did you happen to get him anywhere near our area? Hopefully you didnt have to pack him to far.

Put me inline for pics and specs. mikd324@msn.com Im in the market for one. thank you

All I can say is WOW!!!

This is the only truck you will ever need! What a job to have.

Thats frikin awsome! Cant wait to see what the HOA has to say about thtat

Mine came today

Email sent!

I will be down there. I usually go for the late December hunt but this was my second choice. I know what the unit looks like with 100 tags I cant imagine what it looks like with this many. Figured I could get my cameras out for archery season. I will also be down this weekend for the juniors hunt. If you see the big rig stop and say hi.