-
Content Count
1,243 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Everything posted by bowhunter-tw
-
Hp38 and No 7 about half full - $15 ea others are un opened - $30 each universal sold located in tempe
-
Price drop. Would also be open to trade for rem700 trigger.
-
Ttt open to offers or trades on the Vmax. Would trade for 6mm or 6.5mm projectiles.
-
Ended up getting the Maven RF1. Like it so far. The knob is a little weird on the side but nice for changing settings. Very clear glass and ranges way out there
-
Anybody seen a primer do this? Looks like two little pin holes at the 5 and 7 oclock position where gas escaped past the primer. Heavy bolt lift and ejector mark at the 12 o clock
-
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
Good to know, wouldnt have figured it was that sensitive. I probably should get some nicer calipers. Will check when im home from work. I appreciate the info -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
Do you mean 8 thou? (.008”) 8 tenths is so small my calipers probably wont measure that accurately. I did not wet tumble. Max load on this is 42.9 C my COL keeps this load from being compressed -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
260rem, IMR4350, 41.5gr, 143gr eldx, I might have been into the lands. I just re checked and I only had a .005” jump on the few that were still loaded. Theres a chance that one was seated long -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
It looks like it did pit the bolt face a little -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
I did, unfortunately I cant remember now if it errored on that one or velocity was inline with the others. All the loads that read were on par with one another -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
I will go back and double check, but should be same headstamp, dont think it pitted the bolt face, and I am using a frankford intellidropper, which has been pretty consistent. Maybe that case had more somehow. -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
Would a pinholes primer also exhibit false over pressure symptoms? The other loads of the same charge and primers did not show pressure signs. -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
They are winchester primers. Older ones from the condition of the box and logo -
Interesting overpressure sign
bowhunter-tw replied to bowhunter-tw's topic in Rifles, Reloading and Gunsmithing
Yes, they seem to show some signs of exposure to moisture. Figured either they will go off or not. But would not see an increase in pressure -
Sold
-
Rem 700 short action M5 inlet, Right handed New, put an action in it but never fired
-
open to offers
-
Up
-
3 mags available - $30 each located in Tempe
-
Up
-
Ttt
-
Does anybody have a lightweight wood stove for back country hunting? My buddy is going to be hunting colorado in two weeks and temps are looking to be around 10* on the low end. He would like to borrow or rent one if anybody has one.
-
OBO
-
M5 inlet