Tempe.243

Looking for a welder or Fab shop to weld some welds washers to Nissan Frontier LCAs. Total of four washers to weld. Should be simple and quick for someone who knows what they are doing. Would like to avoid taking of the LCAs so would drop off at a shop or could have someone come by. Also need a bracket fabed up to hold a remote resivior, but the wled washers are my priority.

Tempe.

TTT

Set of 3 Wasp Jak Hammers Set of 4 Grim Reapers 11 new and 5 used field tips. I converted to 125 grain tips and never really used these. Only one Repears has been on the quiver. The Wasps have been used on foam a few times to confirm POI.

Two Stokerized Acrylic Hunter SS1 stabilizers. One 8.5" and one 10.5". Black rods and Max1 endcaps and brackets. $100 per stabilizer, $175 for the pair. Each comes with Easton wrist sling.

Brand new, never used. Accidentally ordered two. $13.00.

TTT

FYI. Outdoorsmans will convert the medium to a tall for $150. I also got the small extendable centerpost. I am 6'1" and can stand now.

Anyone "got a guy" or shop that does suspension work on Frontiers? Looking to get a lift installed but it is hard to find folks in the PHX that work on anything other than Tacos. Might end up doing it myself but figuted there might be some Nissan nerds lurking about. Let me know. Thanks.

Thanks for the input. Kinda want to do it myself but it makes me nervous.

Thanks for the tip. They got back to me super quick and they do work on Nissans.

In search of an 870 12 gauge receiver or a good deal on an old one. The nub on my ejector broke off and I already have the setup I want. Don't really need the whole gun.

I always type that wrong...I meant ejector. The nub that aligns the barrel broke off. And those dang rivets are a PITA.

PM sent.

PM sent

17 rds. Shot three of them and my rifle did not like them. Still have the three spent cases.

TTT

Free bump for great bow. I have had mine since 2015 and still can't justify getting anything else.

Got a youth elk hunt in 3C coming up and have enough gear to make it work but wanted to drop a line to see what is out there. We normally hunt 22 so I don't have to worry about the cold. I have a 12-year-old girl and 15-year-old boy, 5'6" and 6'2" respectively. Both real lean without much natural insulation. Mainly looking for puffys and baselayers. Don't want to spend a lot because they might not fit next year. If anyone is looking to offload some gear, let me know. Thanks

I should have been more specific. Yes, .308 Win.

16:Hunter XTs 340 spine. Cut to 29.25" (carbon to carbon), standard inserts knocks and 100 grain field tips. Blazer vanes helical fletching. Fletching is from Archery Headquarters or by me with AZ EZ Fletch. Most are brand new or barely used, a couple are well used but still in good shape. And couple don't have fletching. I can fletch those if the buyer is good with black and red. Been trying to step up my archery game and tried some bareshaft tuning. Turns out I am underspined. Will trade for same arrow and length in 300 spine. Picks are representative sample.

Thanks for the tips. I get what you're saying about moving the rest. I was about to get to that step and realized that was all based on proper spine. Then I looked at the charts. Charger is listed at 325 fps. Figure at 70 lbs (limb bolts all the way down on 70 lbs limbs) and 30.5" DL (CH3F module). I should be above 315 fps so I used that chart. With 29.25" (CtoC) arrow, 300 spine is where I need/want to be. Looks like I have more room to play with tip weight at that spine. Hopefully Archery Headquarters has some in stock. Once I have the 300s, I will start tinkering with the rest and report back.

Ordered one for .308 and they sent the wrong one. Brand new unopened box.

$14. Added price to title

Hoyt Charger LD at 70 lbs with 30.5" DL. Using this as a guide. Up down is fine. Bareshaft arrow goes right. Fletched arrows group just fine. Bow-Tuning---Bare-Shaft(1).pdf Goldtip says I should have 300 spine.