Tradbow67

150 grain Nosler Soft point

Are all the puppies gone?

Much faster than using micrometers and calipers. Maybe not as precise, but still works really well. EGW really makes nice ones for checking multiple cases at once.

The Lyman cartridge checker checks consistency of ammo. I use it to check all my brass for over all length after I size it and again after I finish loading for over all cartridge length. If it goes in the block it should chamber in all SAAMI spec chambers. If it’s tight in the block I know that something is wrong in my sizer adjustment or in how my bullet seated; like neck tension. https://www.lymanproducts.com/ammo-checkerstm-single-caliber

PM sent

I might be able to help you out. I’ll need a day or two to check my stuff. Im in Flagstaff.

They said that they got about 20k of these primers in stock.

Sportsmans in Flagstaff finally has Blackhorn 209 back in stock!! Only 8 bottles left. Unfortunately they are the new 8 ounce bottles, but better than nothing!!

They seem to seal the breach really well. I’ve noticed less soot in my action after using these.

They also have Cheddite 209 primers. I’ve had good luck with them igniting my muzzleloaders.

Still 6 bottles available.

I’ve got lots of brass. Could spare 250. I’m in Flagstaff though. I’ll ship on your dime if interested.

PM sent

Cal-Ranch has a couple too. Are you going to shoot pellets or loose powder?

I bought powder at Cal Ranch in Kingman 2 weeks ago. TAC and H4350 $39 a pound. Been seeing it come in more often. Sportsmans prices got ridiculously expensive ( thanks to being bought by Bass Pro). They’re starting to come down from what I’ve seen. At least stabilizing. Heck, I bought Federal Gold Medal 6.5 Creedmoor at Walmart last week for $27 a box and 30-30 for $19. I think that’s getting back to normal.

Where are you located? Thanks!

First off I’d like to apologize to Phil Carr. You are correct. Simple rate was for businesses only when I retired. And the UPS customer counter is considered a business account. So yes, UPS does have a flat rate and it has very competitive pricing!! But, UPS small package and UPS freight are not the same. They are still and always will be 2 separate entities.

Just feeling it out. I have some Polaris SxS A arms, shocks and exhaust that were taken off a brand new atv. These parts have only been used from the dealership to our house garage and then swapped out. I have front and rear A arms from a 2013 XP900. They will fit 2013-2019 Ranger 900 and 2017 Ranger 1000. Side seat grab handles for the 2013 XP900 crew. Front and rear shocks from a 2021 Polaris XT 1000. Side grab handles for a 2021 XP1000 crew. Factory muffler for a 2021 XP1000 crew. Factory soft doors for a 2021 XP1000 crew. And an Empire performance muffler for a 2018 Can-Am HD1000. It may fit other models. Just want to see if anyone could use any of this before I put it on eBay. Checking for interest before posting pictures. Located in Flagstaff. I can meet part way to Phoenix or Camp Verde, Sedona or Cottonwood area.

Weekend bump!!

If you ever need an A-arm they run about $140 each for a factory replacement. I’ll let these go for $175 for the front pair and $175 for the rear pair. I’ll do $250 for the front and rear shock/spring assembly. If you’re interested in everything (except for the Empire exhaust) I’d let it all go for $450. I need it gone. Tim 928-853-5295

Check out Tesoro. Made in Prescott.

Correct. I was only correcting the post concerning the difference between UPS and UPS freight.

As a newly retired UPSer, the last post is incorrect. First off, UPS doesn’t have a flat rate box. You must mean USPS. Second, UPS freight and UPS are 2 different entities. You must mean UPS customer counter. If you’re shipping UPS freight you must have a pallet of ammo!!

2nd above post. Hazmat is only required for primers and powder. Assembled ammo only requires ORM-D ((Other Regulated Material Class D)