Nitemann

Yes, a sporter style and target style for the heavy barrels.

Glad it worked out. Just FYI, the biggest accuracy improvement will be dropping the action in a B&C medalist stock. They have them for both the heavy and sporter barrels. Cut my groups in half.

Sold

Spf, thanks.

Let's try $395.

Just be careful not to lose the 2 E clips. Other than that, it is pretty easy and you can go lighter than 2 lbs if you wish. You'll be looking for the HACT trigger adjustment. Let me know if you need any help with it.

No Remington trigger will work. Did you try clipping the spring? Pretty good youtube video showing how to do it. Both of mine are a little over 2 lbs.. It is a 2 stage trigger so you still have to take up the the creep before it fires.

sold

.

found

It's the cartridge that started the phrase "Hand Cannon".

Sold

Would consider partial trade for a Leupold fixed 4X, 6X, 2x7 or 2.5x8.

I'll take this if still available.

Blue 10" factory TC contender barrel in 30 Herrett , Leupold rings and base, and wood forend. No dies. $225.00, Located in Mesa.

Sold to Chris. PM replied to. Thanks

Looking for a rcbs 1/4" seating stem/plug for a 30 caliber seating die. If you have one laying around you don't need or have a seating die your not needing let me know.

This is the stem I'm looking for. I scoured rcbs and didn't see it. I'll check with brunos.

Looking for a set of 30-20 reloading dies. These are 32-20 dies that were made to size 32-20 cases down to .308 bullet diameter. If you have a set laying around you no longer need let me know.

Boone And Crocket Club 25th big game awards 2001-2003 $15 shipped or $10 if you add it to a current order. Great shape I'll take this one. PM inbound.

Like Adam previously stated not a coues but it was harvested with a specialty pistol. With 30 BP I finally drew an AZ desert bighorn sheep permit. I used a custom Remington XP-100 in 284 Winchester to harvest my ram at 157 yards.

110 would be a long action.

I'll take it if you have any plans to come up to Phoenix.

Up

Looking for some reloading die bushings, Redding, Wilson, etc that you may no longer need. ..249,.250, .251. Let me know if you have something you want part with.