-
Content Count
1,275 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Everything posted by Nitemann
-
Could use a little more, new or once fired.
-
You could probably use a 6.5 Creedmoor or 260 rem sizing die adjusted to just size the neck down to .264 as an intermediate step then full length size with your 6mm Rem full length sizing die. Trim to length and anneal. Not sure what you would consider GOOD 6mm rem brass. I could probably spare 20 once fired 6mm rem cases if want. Rick
-
Found some thanks to Krag but can use more
-
Sent you a PM.
-
Looking for a front rest bag for a 3" forend or maybe a little wider. Just checking to see if anyone had one laying around they no longer needed before buying a new one
-
This is what I'm looking for. A Protektor or Edgewood or similar for a 3 inch wide or wider benchrest forend.
-
This would of been in 2019 in Gilbert. They are incredible smart dogs. They were also all girls.
-
Not sure why it turned, if you can fix it that would be great.
-
Curious if anyone else here got one of these pups. We got the one with the light blue color. Best friend we've ever had and spoiled rotten. If did get one post up a pick.
-
Was hoping it was one of the 327 Federal Magnums.
-
I'm assuming 357 mag?
-
Is Brunos the only place in the valley that sells neck bushings? Hoping for a little closer to the east valley.
-
Chris Sent you a text.
-
AJI wouldn't have any. Probably will have to order online unless someone has a .256 or .257 bushing they want to part with
-
For those who asked I adjusted the trigger down to 2lbs and added a 6x18 Leupold scope. With Hornady match ammo it's shooting 1/2" at 100yds for 3 shot group. Still waiting for Bell and Carlson to have a sale on their stocks but doubt if it will have any effect on the groups like it did on the 22" sporter barrel models. All in all, i'm happy.
-
What caliber is the RUM brass?
-
Anyone happen to have a Remington 6p0, 660 or Mohawk stock they want to part with? I know I can order one from Boyd's but checking to see there's a used one locally.
-
PM replied to.
-
Not the NW valley but you can also try Gilbert Butchery at 965 S. Val Vista Drive in Gilbert. You can also try U5 Processing in Morristown. All the rest have been mentioned.
-
I bought this. I already have 22" sporter barrel versions in 6.5 grendel and 6 ARC. They don't shoot real well until you drop them in a Bell & Carlson stock. Night and day difference with groups around 3/4 with factory ammo and 1/2" with reloads or better. You can clip a coil off the trigger spring or replace with a Timney which also makes a big difference. Some folks say they shoot 1/2" as they come from factory but I haven't seen it yet.