Schmitty

pm replied to.

I'm looking for another blind or two. Let me know what you have, condition and what you would like for it please. I am partial to double Bulls window design for my purposes. Thanks! Schmitty

ttt

I have a custom 6.5x284 that I'd part with. Specs are as follows: Fully blueprinted Remington 700 (older 1960's action custom coated in matte black) Glass and pillar bedded in a Manners EH2 stock (3 color speckle tone "Forest Hunter" finish) 26" stainless Brux 1 in 8" # 3 contour Seekins Precision 20 MOA Picatinny base bedded to action Timney Trigger Multiple dies (Forster Bench Rest set, RCBS FL set, Forster Case Bump dies and wilson seating die.) 200 pieces Lapua Brass Assortment of 6.5 bullets available separately ( I could put together a sampler for Load Development that I would include with the rifle) All work performed by Ryan Pierce of Piercison Rifles. Ryan built two other 6.5x45 Lapua's for me that are absolute tack driver's (consistently sub 1/2 MOA) I've been building a new house for the past year so I havent had any time to do any load development with this rifle. I took it to the range once to break in the barrel and sight it in. There are maybe 20 rounds total down the barrel. I have receipts for the work performed if needed. I don't really need to sell it, but with 3 other 6.5 mm rifles, I don't really need the rifle either. $2100 Firm. PM me if you are interested. Schmitty

...

I've got two boxes that I'd sell you. Let me know. Thanks! Schmitty

Did "Heart" break the top 3" of his right side? I'm pretty sure that we saw that buck last week while scouting for my wife's early rifle bull tag. Great job on getting your 1st choice killed opening morning. Not always an easy task given the pressure. Schmitty

I'll take it. I'll give you a call tomorrow so that we can work out the details. Thanks! Schmitty

I'll take it. I'll call in the AM regarding the details.

Slik 700 Dx

PM sent.

What finish on the action? I'll take it with the Krieger as long as it isn't the coarse sandblasted SPS/ADL finish.

Which LRAB, the 129 or 142? Thanks!

Primos Ivory plate and Top pin for finesse.

EASTON 300 FMJ @ 32" tipped with 125 grain VPA terminator. I never did find my arrow after it blew threw my bull on a long quartering away shot.

I will take the great northern stove. Pm me with details/contact information. Thanks! Schmitty

My wife hit the jackpot and pulled an early rifle bull tag in Unit 10 this upcoming Sept. She is left handed/left eye dominant and up until now, she has been shooting RH rifles left handed. I'd like to surprise her with her very own rifle built for Southpaws. I've looked around locally, but pickings are slim. I can always special order something, but I figured I'd ask here first. There's a gunshow in town that I'll check out tomorrow as well, but I'm not too hopeful. I'd prefer a LH Rem 700 long or short action with a standard boltface (.484") that I can rebarrel to a .260 or 6.5-06, so caliber isn't important. I'm open to Savage, Tikka, etc. as well. Please let me know what you have! Thanks! Schmitty

outdooraz, pm sent.

I've been shooting 300 gr SST'S out of my TC behind a stout load of Blackburn 209. While I prefer to chase bulls with my bow, 2 friends have borrowed my MZL for the past 2 unit 8 cow hunts with quick clean 1 shot kills. Both were pass throughs if I remember right. I think you will be fine using them for most anything that walks in AZ.

Find a used hoyt Katera XL with the cam &1/2. Adjusts to 32"

Buddy just shot a bull in the shoulder and only got 11 measured inches of penetration. The broadhead broke off at the threads and the shaft fell out. Shot was 55 yards with a 100 gr chisel tip GD on a 450 grain Easton ACC @ 285 fps. Probably a great BH for deer, but I don't think I feel comfortable with using them for elk after last week's experience.

Which gravedigger? The chisel tip or the cut on contact? Congrats on your bull!

What are you looking for as far as trades go?

Promotive?

Or you can buy a used pair of Swaro's for less