Schmitty

It depends. The ideal dog will run big (I don't much like them out beyond 1/2 mile) as long as they will hold and not push the covey. After the birds are broken up the dog really needs to SLOW down and work tighter when working singles. However, I've only had 1 dog out of 5 that truly figured it out and would slow down after the initial rise and really excelled at finding singles. I guess that's why you run them in braces so that each dog can compliment the other!

What does Healy's charge to do the transfer? Do they handle putting together a trust or only individual forms. Fingerprints and passport photos done on site?

If the arca rail is included @ $225 I'll take it. PM me your contact info and we can work out the details. Thanks! Schmitty

FOR SALE (bipod not included) Custom Remington 700 Precision Rifle. Blueprinted Stainless Remington 700 action with pinned precision ground.030 recoil lug. Factory Trigger. M5 style DBM Bottom Metal utilizes AICS pattern magazines. 1 polymer magazine included. Seekins 20MOA picatinny rail. The original factory stainless + fluted barrel was rebored to .264" with 1-8" cut rifling, hand-lapped and rechambered to 6.5x47 Lapua by Classic Barrel and Gunworks. Barreled action professionally pillar and glass bedded into a McMillan A3 stock with molded in GAP camo. After a quick 10 shot break in, I tried out a few loads that shoot well in my other 6.5x47 rifles. See the attached photo. Needless to say, I think this rifle will be a shooter. 25 rounds total down the barrel. $1250 Located in Prescott but can deliver to N. PHX or the Verde Valley

Inbox cleared. Thanks for the heads up! The rifle weighs 9 lbs 2 oz.

Inlet for what size Barrel channel and which type of bottom metal?

Btt

" Brux #4 Heavy Sporter 24" Stainless Barrel in 6.5 PRC: Fluted 22", 1/8 twist, barrel was coated by gun smith. Fit a Defiance Action ;Deviant GA Hunter (Long 700) $350 obo" how many rounds down the barrel? Thanks!

Yes

I have 1500 sierra 155 palma match kings and 500 168 match kings. $150 per 500.

Do you have a plan for keeping them cool thru the summer? AZ heat and rabbits don't mix very well. We used to use large blue ice blocks which needed to be swapped out midday so 2 per rabbit per day even in full shade. Otherwise, they are pretty easily kept. I personally like hybrid does that are 1/2 Flemish Giant with a NZ or CA buck as it gives a bit more length to the loin and hind legs which is where all the meat on the carcass is. Good luck! It certainly is doable and will be good for your kids. It's been 30 years since I sold my last rabbit so I can't offer much help on where to look. I'd get your kids involved with the local 4H club and there should be plenty of resources to get you started.

Yuma County Fair will be 1st week of April. You can support 4H youth and buy some overpriced rabbits @ the auction or purchase them cheap at the resale barn afterwards. Buy yourself a couple of CA or NZ does and a buck and you'll be gtg. Or grab a .22 and take a walk in the desert which is both cheaper and a whole lot more fun!

Text sent

I'll take it.

I am looking to add another 650 or 750xl to my bench so that I can keep one machine permanently setup for small primers and the other for large. I'm good on caliber conversions unless you have a spare .308 or creedmoor set laying around. Condition doesn't matter as I'll have Dillon refurbish anything that needs attention. Just seeing what's out there before I make the drive to Scottsdale. Thank you!

Btt

What are the specs on the scope on the .260?

I'll buy you 50 or 100 Peterson SRP 6 creed brass from Brunos as they show it in stock. PM me your contact info and I'll be in touch.

What is the lot# on the prc brass?

I'll take it.

Let me know. Thanks!

I'll take the model 70 assuming that the finish/bluing are original, the stock hasn't been cut and butt pad is original. (Sorry, the picture doesn't show the butt of the rifle.)

Tremendous buck! He's got it all! Length, mass and prongs. The fact that you got it done with Archery while toting around your boy makes it that much more Incredible. Nice job!

I'll take this if it's still available.

Triclswps. Az designed and made in USA. There's one for sale in the classifieds right now for $75.