Wayback 71

Lazy-H98, thank you, was more than Happy to share, the reloader 25 load was basically from a guy from you tube , i worked my load up to what he claimed was his load , he was using the 162 eldx which i did try with a coal of 3.33 and hornady brass, it grouped well till i went out to 300 meters then opened up quite a bit , he also claimed 3000 fps with 69 g of Re-25 which i didnt get , i see our speeds are very close which adds up ! Reloader 25 is right behind imr 7828 on the burn rate chart. Great group btw, i realize its an old thread but the more load data thats shared the easier it is for the next guy 😁. Good luck with your 270, mine liked imr 4831

Ive found a couple really good loads after extensive load development for my tikka 7 mag ( stainless). 60.8 g imr 4831 , 3.24 coal , barnes 150g ttsx , Hornady brass, fed match 215 primer, right around a .5 inch group at 200 meters (224) yards. Absolute nailz at this distance but for some reason my speed sucked, I"m just shy of 2800 fps. The load i settled in on was 69.2 grains of reloader 25 , winchester brass, fed match 215 primer, 3.29 coal , 160g accubond . i have 2 different 4 shot groups under 2 inches at 300 meters, one was today feb 11 2021, speed on this load is right around 2900 , not the fastest loads but extremely accurate.