willhunt4coues

COUES not COUSE...LOL

Ttt

I have a Ballistics edge model 400 annealing machine. It does 308 size cases (6.5 cm, 6.5x47, exc). You can buy plates that have up to 4 sizes. It spins cases 360 degrees in flames. Has 2 torches and I have the split adapter . The hoses are not included. Normal price is 495 I paid 525 with shipping. I am asking 400 obo. http://www.annealingmachines.com/model-400.html

Next day air to them and they will send back how you send to them (next day air). I got mine out and back in 1 week during early November in 2012 and they were busy. No charge except for me to air to them.

I love my chair. You can adjust it to lay back for calling or adjust it up so you can glass all day with no back cramps. I also have never got wet from the ground either. Worth every penny I have 2. https://www.predatorquest.com/product/pq-logo-easy-chair-seat-cushion/

If you want a great Shoulder Bump Gauge check out Whidden. http://www.whiddengunworks.com/product/shoulder-bump-gauge/ When you order their FL bushing die it comes with the correct bump gauge included. Just some FYI.

They run true

I have the accustock from savage sitting around if you would like it.

Lol

Off of Browning website. Magazine Capacity For all A-Bolts except Micro Hunter — Magnum calibers, including WSM: Three in magazine, one in chamber. Standard calibers: Four in magazine, one in chamber. 223 Rem.: Five in magazine, one in chamber. For A-Bolt Micro Hunter only: Three in magazine, one in chamber.

First off MAGAZINE NOT CLIP....LMAO sorry I had too... I use the Berger 140 VLD. FYI I measure Cartrige base to ogive CBTO... The ruger Magazines are also short but seating at 2.175 which is .030 off the lands on my custom also work great in the ruger. Only bad thing about the Ruger is the throat is way too deep at 2.255. My custom is at 2.205. Most savage, custom have been 2.205 to 2.225. Measure you throat and see how deep your throat is. If its too deep you will run into this with all bullets. Even though I am .080 away on the lands on the ruger is shoots great. They say the Hybrids are less sensitive to seating depth but I had a heck of a time finding a sweet spot in all my guns.

I have a JIm White tripler for sale if anyone wants to buy it.

With all 3 of the ruger american 6.5 creedmoors we own the FACTORY ELD-X were averaging .350 groups at 100 yards. If I were to load them and play with seating depth and shoot them out of my custom I know they would be under .250. I just can't get away from my BERGER VLD 140 to load some of these up to try.

Ttt

I have for sale Swarovski 15x56 slc binos I would like 1400.00. They do not have a single scratch on them. I had them go through the binos in 2012 and make sure everything was great. Have paperwork showing no cost for all work done. They are great. I have the 15x56 HD now. My son likes these but a little big for him so he wants the new 12 or new 15. I know he's spoiled.

Whatever you do don't use modeling Clay unless you don't mind spending hours on clean up. Plumbers putty is the BEST. Its just like the clay but without all the mess.

Also to confirm that the warranty will be covered you have to buy from an authorized dealer (unless buying used). Swarovski has a MAP pricing and if this person is selling for less they will not be a dealer long.

Here is my Daughter annealing my brass for me while I do other prep work...LOL

On saturday I was able to put my dad, my nephew and I in. BUT when I tried to do my son it would just say UN-BEARABLE after entering in my payment info. I too talked to the CRYPT KEEPER this morning and told me to try again later and if I still can't get him in to put in by paper for him.

yes I have the MOA-2. I never really looked at any other reticle except the new one MOA-H. Okay ya I see that only the Mil dot and Dot reticle has the target turret (caps). Never even paid attention. LOL

Did you have Sightron do the custom caps on that scope? The reason I ask is because I have never seen a SIII 6-24x50 with caps. VERY NICE rifle at a great price. This is exactly how much mine cost to build myself.

I have dealt with Swarovski with repairs needed on my binos and within 1 week had them back at no cost replaced the left side of my binos never had an issue since. People say that Vortex is the best. I have dealt with Vortex with repairs needed on my PST scope and within 1 week had the back at no cost BUT within weeks had to send it in again, and yep you guessed it a 3rd time.

I bought just any reloading gear I thought I needed and man was I wrong. It really depends on what reloading you want to do. If you want to make precise, accurate, and long range ammo then you really need to read the accurate shooter reviews of what the bench rest guys use. I bought all this stuff and ended up selling it ALL because I was not getting the results I was looking for. I upgraded all my equipment off of what the bench guys/long range guys recommend taking in reviews from multiple forums and sites of what is the best of the best. If I would have done this first I could have saved money and not bought all the first inexpensive items. Now if you are wanting to do both fast reloading and precision reloading then you will need to check into all the reviews you can. I can tell you from now on thats ALL i do. If i want to buy something i research for months before pulling the trigger (no pun intended) so I know I am investing in something I truly need and want. In the end it is worth the wait and you will already know how to use it before getting it. Also there is a great book out there for Precision Reloading called Handloading for Competition Making the Target BiggerIt has probably the best info for making those perfect pills for precision shots. http://www.amazon.com/gp/product/096269259X?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 Whatever you do RESEARCH is the key. Dont get something because I said or Joe Blow said so. Get what you want and need the first time. I went through 3 presses before settling on a Harrell Precision Press why because with my dies it creates zero run out and I can take the press to the range if need be. So I spent 450.00 total on the first 3 presses then spending 200.00 on the Harrell and on the 450 I only got back maybe 300. Once you start it is very addicting and time consuming.

What about the guys that put down lets say an example 24B late nov Coues 2nd choice or 3rd choice. Now I have seen this happen lots. They DONT get drawn for it and actually have left over tags on the list of left overs. I UNDERSTAND how the draw works but laugh that there are left over tags for a unit they put in for but did not get drawn.

6.5 cal 143 grain ELDX https://www.precisionreloading.com/cart.php#!l=HN&i=2635 6.5 cal 140 grain ELD Match https://www.precisionreloading.com/cart.php#!l=HN&i=2635 They dont have but 44 boxes of each get them while they have them