-
Content Count
695 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Everything posted by azbow
-
PM sent on Bear bow and Bears feet
-
It fits the ST models. Don't know if other models have the same eyepiece mounts
-
This is an older but never used camera that fits right on Swarovski spotting scope. Minox digital camera module, 5.0 mp, remote, SD card, case, all paperwork and wires with box. Bought it from Outdoorsman 5-6 yrs ago for $225 and never used it, actually forgot that I had it. Very small and light wt unit that has a carrying case to hold it and the remote. Open to offers, thinking about $75
-
It mounts right to the spotting scope body in place of the eyepiece. Won't work on binos.
-
This is for an iPhone 6plus. they cost about $50 from Phoneskope and I would like to get $35, you still need to get an adapter to fit your optic
-
S4 retractable 36" cord tether system for rangefinders, radios, gps or whatever you don't want to loose. New in box new are $40-45 I would like $25 I will be in Phx Feb 14-17 or Tucson area after that
-
XL, Verde It has been hanging in the closet and never worn so it is like new without tags. $175 I will be in Phx-Glendale this Sun-Tue. Otherwise in Tucson area.
-
I can text some if you pm your #
-
7mm Rem Mag Memorial Build
azbow replied to lancetkenyon's topic in Rifles, Reloading and Gunsmithing
I am using dial calipers now. The digital was frustrating as it would turn itself off and other annoying tricks. You are correct, the comp is 1.004 " long, I just add that to my ogive length and record that measurement instead of rezeroing. Sorry for the confusion. I have tried a lot of powder and bullets through this gun and it seems to like Retumbo with the 180's the best so far. It didn't do as well with the 168 VLD' s or classic hunters. The 1 in 9 twist might be the reason... -
7mm Rem Mag Memorial Build
azbow replied to lancetkenyon's topic in Rifles, Reloading and Gunsmithing
With the Hornady comp on the caliper it does measure 3.685 at the ogive. 68.3 gr of Retumbo with Fed 215 primer, 2920 fps. Bartlein 25" barrel, Mcmillan stock, Zeiss Conquest 5-25 Accuracy has been a work in progress but this load showed a lot of promise going into the hunting season so that is what I used. Elk, Antelope and Coues all drt, but all were taken at about 300 yds. Shot out to 700 with pretty good results. Will start again with it soon out to 900 or so. You set the bar pretty high with your effort and results. Thankyou for sharing and showing what is possible. -
7mm Rem Mag Memorial Build
azbow replied to lancetkenyon's topic in Rifles, Reloading and Gunsmithing
The magazine box is 3.40". I am loading the 180vld hunting to 3.385 oal and the ogive is 3.685 with the Hornady comparator. That is max length for them to cycle through with the bolt to smoothly pick them up and chamber them. I can't find the chamber length to lands measurement, ( have it somewhere) but with the longer and bigger bullets in this gun it isn't much of a factor since I can't seat them out any longer. You built a great rifle!! -
7mm Rem Mag Memorial Build
azbow replied to lancetkenyon's topic in Rifles, Reloading and Gunsmithing
My Win mod 70 has a short box and dictates how deep the bullets are seated. I seat them out as far as I can to still fit in the box without getting jammed, but it causes a pretty good jump to the lands with 180 VLD's. Wish the box was longer. -
7mm Rem Mag Memorial Build
azbow replied to lancetkenyon's topic in Rifles, Reloading and Gunsmithing
Lance do those long oal loads fit in the magazine box? -
Put a fence around the yard and make it strong enough to damage a vehicle that hits it. Corner lots get all kinds of abuse, some intentional and a lot from people that aren't paying attention or just don't care. Better to deter problems than try to catch the problem makers after damage is done! Most people that have lived on a corner, won't ever get another home on one, myself included!!
-
What's the deal with RUM brass
azbow replied to DesertBull's topic in Rifles, Reloading and Gunsmithing
I have been looking for new Rem brass in 7 mm Rem mag for over a year. -
Love to hear the story but don't get muley crazy. Great buck!
-
Well how was the hunt Murf? Did your new truck take you right to a big bull?
-
You might want to latch the lock closed before you enter and have someone come along and lock you in.....
-
Great buck Matt! Glad you got it soon enough to relax with family before heading back over there. Forgot to Thank you for your service on Veterans Day. God Bless you and your family!
-
Will the XL fit a 15 1/2 " calf or need the L size?