Siwash

bump

TTT for this econo mountain goat.

Steve is solid. He fixed a flat on my boat trailer and wouldn't take any $$$.

Thanks, found a complete 29x9x14 factory takeoff wheel/tire on Ebay for a little over $200 shipped. I did have my wife look at FB and we found one or two but the sellers were wanting to off load the whole set, not singles.

Looking for a takeoff/spare for a '25 Ranger XP 1000, factory wheel is 14x6 with 29x9x14 tire and it look like the wheel spec are good for any Ranger 1000 from 2022 to current. I'd take a rim without a tire too. Please let me know if you have one for sale. I am in Tucson but frequent the Sonoita area. As an aside, in the next month or two I will be posting a '14 Ranger 570 EPS with less than 3K for sale. It will come with a spare Thanks for looking.

For Sale: Bell & Carlson black/gray webbing short action BDL Remington 700 stock for sporter barrel that had some inletting done in the barrel channel. Aluminum pillars and aluminum block, pachmayr recoil pad. This was recently posted. Nothing wrong with it at all, it just turns out the .308 I bought it for is gonna come with a HS Precision, so I won't need it. $175 in Tucson, or $195 TYD cash or MO/Check. Thanks for looking.

Last bump before it goes to Ebay auction.

One more TTT

TTT

24 pts and doesnt look like Goulds in 35A are in the cards for me, unless I got drawn for turkey and not pig.

Bump

TTT

For Sale: Used Magnetospeed Sporter. $100 TYD, $90 pick up by El Con Mall in Tucson Two minor issues the price reflects: the 9volt battery box quick release latch broke on one side. It functions as needed and you can put a rubber band around the half that doesn't seal completely as needed. The bottom screw tension know on the mount no longer works; I'm not sure it ever really did but in theory it puts more pressure on the lower barrel mount point. Neither of these issues impact its performance. I also only have 1/2 of the "box," but it was pretty worthless half or whole I used it a few weeks ago to confirm a load from last year. Selling because I just bit the bullet on a Garmin. Located in central Tucson. Will be in the Sonoita/Patagonia area the next 3 weekends. This on Craigslist too. Thanks for looking.

Not in the Valley but in Tucson I have had a few pairs of boots resoled at El Con Shoe Repair off Broadway west of Swan and been pleased, $85-95 with quality Vibram soles usually a 2 week turnaround.

TTT, $90 local $100 shipped

TTT, will be at the SERP range tomorrow morning if anyone wants to give it a trial run.

old minus some .44 spl no one will buy - 25 rounds wadcutter reman. ammo mixed headstamp 44 SPL, $10 Thanks for looking.

TTT, price drop on the power, 2# for $50.

this was donated/its no longer available.

PM sent.

I just built a secondary bench for the workshop at our family's property. I used a 60x30" butcher block for working area ($99 at Floor & Decor) and used 2x4's we had laying around along with salvaged screws and old wood stain that needed to be used up. A member on here also sold me a fantastic Lyman press, coupled with a Rockchucker I had laying around (primary use is for pistols, once cases are prepped and primed I can charge and then seat/crimp between the two presses). Storage is below and case trimmer, etc. is mounted on a smaller block of wood and can be clamped on as needed. I'm a lousy carpenter and it's not built for looks but its stout and I like it.

edit, just returned this to the vendor i bought it from...

TTT, will be in downtown PHX over the weekend

TTT will be in downtown PHX over the weekend.

"Wobblers" were the go to when I was fishing it in the mid 2000s, a piece of aluminum or light gauge steel doesn't tend to get ripped off in a strong Columbia current