Siwash

Friday Bump

gone

TTT

Bump. These are way cheaper than a boat or canoe and much easier to store and transport. Trades for hunting/saltwater fishing or firearms considered.

TTT for some new pics.

For sale or trade in Tucson: 1. Badlands Inferno Realtra Xtra Jacket, Size Large. Worn for one weekend on a youth turkey hunt, as new no stains/tears, etc. $35 2. Tikka T3 Stuff -EGW 0 MOA Rail. Never hunted with but was mounted, did dremel off the last section as it prelcuded the objective of the scope I had on the rifle from clearing. $15 -Warne Maxima 1" Permanent Ring Mounts, High. hunted with for a few years but in good shape. $15. -Free if you buy both of the above: Limbsaver T3 recoil pad. Used and it shows but not tacky/flaky and way better than the factory ones. 3. FREE: euro skull mount. You can have everything listed for $60. Would trade for IMR 4831, H4350, R22 or 9mm ammo. Thanks for looking.

^^^what he said. They can be somewhat challenging to mount in comparison to other styles, but once you have your scope leveled torque to specs and they are pretty much bombproof.

not muffs or electronic but had these on at the range the last few trips and been pleased with the performance: https://www.midwayusa.com/product/187765/otis-earshield-ear-plugs-nrr-31-db

thanks, good to know my memory still works too.

Can anyone provide the suggested OACL for the following calibers/bullets? I switched computers and lost the darn e-book I had of the 10th edition of the Hornady manual. 143gr ELD-X in 6.5x284 If memory serves it was 2.875" or something... 178gr ELD-X in .300 WSM, again wanna say it was shorter than most factory loads...2830" or so. Thanks if anyone can help...I'm using H4350 for the 6.5x284 and will probably use that or R22 for the .300WSM.

they are harder to see if you shoot steel I havent not noticed any difference in loading them versus any other type of bullet. And they do shoot well and perform great on big game

For sale or trade in Tucson, will post pics later 1. I have some 3-4x fired Norma .300 WSM brass, approximately 80 pieces, Brass was treated right and never hot rodded with heavy charges...just got a new barrel and starting over with new brass. Brass needs to be deprimed, etc. necks seems fine/no stress cracks...should be good for several more reloads. 2. Approx 50 pieces of once fired Federal nickel plated .300WM brass, it has been resized/deprimed and tumbled. Would trade for a sealed pound H4831SC, Reloader 22 or26 or H4350. Would also trade for 100 count .30cal/.308 150 grain Barnes TSX or ELDX bullets in 6.5 or .30 178gr+ I'd sell the brass for $35. Thanks for looking.

I put a B&C Alaskan on a 700 in .270, nice stock, but there was a lot of contact with the barrel channel on the factory sporter barrel that required inletting. And then finally I had to bed the action because accuracy was questionable at best...just my experience but it was far from drop in and shoot. I like it a lot now though...but that extra work may or may not be worth the money I could have to put into a more expensive stock

I have a similar Cabelas case, believe it is made by Boyt for Cabelas. Good protection for the money.

PM'd a trade offer for 300WM brass.

SOLD.

TTT

SOLd.

Good review of the pack here: https://m.youtube.com/watch?v=MsdXOh0y-Qk

TTT, feel free to make trade offers. Picked up a used pack from another member and need this gone.

TTT

What size frame and belt?

TTT also found a mountable shooting rest I will throw in, believe it is "flat earth" color. https://www.midwayusa.com/product/126539/eberlestock-pack-mountable-shooting-rest-nylon

Weekend bump

Trade offer set via PM.