Jump to content

azgutpile

Members
  • Content Count

    541
  • Joined

  • Last visited

Everything posted by azgutpile

  1. azgutpile

    Frustrated

    I bet it's sitting in the stock differently. Like kwp said, check action screws, barrel clearance and that the magazine box isn't binding up between the stock and action.
  2. azgutpile

    bedding a rifle

    I say it depends on the stock your bedding. If it is ridged enough and will the bedding compound stick to it.
  3. azgutpile

    Damned coons

    Where did you hear that they aren't indigenous?
  4. Whatever you decide, make sure Lapua makes brass for it.
  5. azgutpile

    Stone Glacier Backpack

    I have had the SG Terminus pack for a few years now and have nothing but good things to say about them. It is a minimalist pack with very few pockets, but the comfort and weight more than make up for the inconvenience. Another good pack company to consider is Kifaru.
  6. azgutpile

    Meat from animals in the rut

    I don't put in for the December coues deer hunts anymore, because the meat isn't anywhere near as good as the early season deer that I've shot. All of the December deer were dropped in their tracks, boned out immediately and hung up in cold weather.
  7. Is the bullet scraped up on just one side or all the way around?
  8. azgutpile

    Polaris Ranger 2016

    Full size or mid sized Ranger?
  9. azgutpile

    Chevy Truck vs. Lamborghini

    Here is a pretty cool local truck.
  10. azgutpile

    None Vocal Unit 23

    I was up the first weekend and we didn't hear a single bird. All of the birds that we saw were by themselves.
  11. azgutpile

    Leica Rangemaster 1600 REDUCED !!!!! $450.00

    Yes it does.
  12. azgutpile

    Just want to vent

    Instead of squaring, I think they should increase the bonus point pass from 20% to 50%. This will lower the required points to get into the bonus point pass and still gives everybody a chance at getting drawn in the regular draw.
  13. azgutpile

    Card Hit - 2016 style

    with his AZ Liftetime license, he doesn't fall under the 10% nonresident cap, he has the same odds as a resident, but has not o pay the nonresident tag fees. Everything else you said falls inline with what my buddy in Palmer says.
  14. azgutpile

    Parallax or Side Focus Importance

    I would not get a long range scope without it. Issues could start showing up after 400 to 500 yard range.
  15. azgutpile

    What's the deal with RUM brass

    I haven't had good luck with Nosler Brass. 210 grain VLD @3050, and only get 3 firings before the pockets loosen up.
  16. azgutpile

    What's the deal with RUM brass

    I have a 7mm Saum if I did it again, I would go 280 ai.
  17. azgutpile

    What's the deal with RUM brass

    I don't think they are making RUM brass for reloading.
  18. azgutpile

    Made in usa

    That guy has been gone for over 10years and our name still suffers for it! Nice sheep you have in your pic. Jk
  19. azgutpile

    Does Working Out Help You Hunt Better?

    Depends on the type of shape you are in. Going to the gym will help, but nothing gets you in better hunting shape than hitting the hills with your pack.
  20. azgutpile

    Rain

    How do you guy know that you've had 3 hatches last year? I was taught that gambles only have one hatch unless something happens to the first hatch early enough.
  21. azgutpile

    Light Weight Deer Gun?

    Do they make a 7mm-08 or more recently called 7mm-0Lark?
  22. azgutpile

    Rifle went haywire!

    Make sure your magazine isn't binding between the bottom metal and the action, use a brass brush, make sure the rings are on straight and tight and try cleaning the copper out of it again. If that doesn't work, have someone else shoot the rifle.
  23. azgutpile

    Stiff bolt close? Why

    What is your procedure for setting up your resizing die? (e.g. Touching the shell holder, or 1/8 to 1/4 turn past touching?)
  24. azgutpile

    what to bring on mid January Coues Deer hunt

    Bring your 15's and your spotter.
  25. azgutpile

    Building my 6.5 Creedmoor chassis

    Is your smith David VanHorn?
×