Viper

Does this model give you a shooting solution all the way out to it's max ranging distance? My Leica 2000-b limits this to around 800 yards, maybe for liability reasons. Also, will it give corrections in moa? My Leica gives it in clicks...which is kind of a pain. Thanks

That is sad news. I am a big Shockey fan. I haven't seen his show since cutting the cable cord quite a few years ago. I liked his style and watching his family being part of the show. Prayers for the family.

I'll take it. PM sent.

Which model is this? How well does it reduce recoil? Self timing?

Remodeled my kitchen and replaced the stove/microwave. KitchenAid oven with drop in GE Profile cooktop. Everything works. $100 obo GE Profile over the range microwave. Everything works. $50 obo Located in east Mesa

Yes. The cooktop drops into the countertop (zoom in on picture). Both were hard wired together in the junction box.

...

Check Brunos every couple days. I picked up an 8 pounder a few weeks ago.

Try Brunos

I'm curious what is your method to polish/remove a bur in the rifle chamber? It is leaving a slight scuff and scratch on the shoulder of the casing.

Exactly!! I took it to Todd South and that was his consensus. He bore scoped it and didn't see anything that would cause that. He demonstrated with an unattached action how the brass hits the side of the ejection port when extracted. I checked my 1x fired brass, pre-tumbled, and found the same marks. I guess I was going down a rabbit trail for nothing Lol.

Congrats! Really nice buck! I was at Todd's shop today and he told me all about it. He is a really nice guy.

May be a long shot. Anyone here in the Phoenix area have the corrected reamer (.535") that fixes the tight chamber issue with reloads?...that would not mind sharing/renting it to me. Or a good smith I can take my rifle to, that is familiar with this issue? If you are not familiar with this issue, there is a long thread on Long Range Only: https://www.longrangeonly.com/forum/threads/6-5-prc-dies-not-sizing-enough.6782/

Update: I used the reamer myself. The extended T-handle made it easy to do by hand with the action attached. It only took a couple turns. Now to find time to shoot amd see if it made a difference.

It is Hornady brass from factory ammo. That's all I have.

...as of 1:30 today. $320. A lot of other powders too. No primers.

Sorry, I did not notice.

Do you think it would fit under an airplane seat as a carry on personal item? Or a little too tall?

The Kuiu Venture 1800 is 25% off now, for $140. I think the sale ends at midnight. I'm trying to talk myself into another pack 😁

Which ranch? Cost?

Thanks! I might chicken out on trying this myself, and have him do it.

No, I haven't tried that. I have them. That's just pushing the brass further into the die, right? It seems it would bump the shoulders more/too much. The guys on LRO tried custom dies and modifying dies. The conclusion is that it is a chamber tolerance issue and the correct fix is a corrected reamer. I start seeing it on the 3rd firing. I am "renting" a reamer from a LRO member. I should get it by end of the week. I've never done this before so it should be interesting.

I have a Vortex Viper HST 4-16x44. $400 Located in Mesa

Does it have the AC package? Location?

Lot's of good info and videos on the web. Watch videos by Eric Cortina and Panhandle Precision, to name two.