Jump to content

Phil Carr

Members
  • Content Count

    681
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by Phil Carr


  1. Arizona like many other states had a ruling that no shotgun bigger than a 10 gauge can be used on game.I set out about 14 years ago working with the AZ Game and fish department to allow the use of the 8 gauge for hunting all wildlife that could be hunted with lower gauge shotguns. ( Migratory birds are governed the federal G&F) so waterfowl or example cannot be hunted with the 8 gauge. 
    I owned 2 8 gauges at the time.

    Fortunately the Commissioner at the time agreed with me ( he did not accept the panels original decision to deny my request.) The  panel felt that AZ hunters might be confused and shoot migratory birds with the 8 gauge. My response was earlier today the department suspended a hunters license for 5 years for taking two deer in the same year. The hunter argued he was not aware that this was a violation. Ignorance was an excuse for not knowing the law.
    The panel was directed to go back and figure out how to allow the 8 gauge. 
    Further banning  the 8 gauge did not make sense after all 3 1/2 “ 12 and 10 gauges can carry an equally large payload. Other states allow the 8 gauge.
    The goal should be to harvest the game you are hunting as effectively as possible. As long as the hunter abides by the limit and hunts ethically.

    As the law stands today you can hunt all big game with the exception of bison. As well you can hunt predators and upland game with the 8.

    I have now taken turkeys in New Mexico and Florida as well.

    If any members have 8 gauges it would be nice to hear from you.

    PS calling in coyotes using the old 8 gauge is a blast.

     

    • Like 2

  2. IMG_2910.thumb.jpeg.558379d15ff18d3c197ec6663d11d8b6.jpegAfter years of waiting to get a turkey tag I finally completed a bucket list item. My brother called in this bird in on the 2nd day I was able to hunt.

    2oz of #7 1/2 shot bing pushed by about 5 drams of black powder. W C Scott and Son 8 gauge hammer gun made in 1888. Picture of my brother posing with my 8 gauge and bird.

    • Like 20
    • Love 1

  3. I am selling my OWENS 2 dog aluminum dog box with top storage. I purchased this new and is still in great condition. It fits perfectly in a Tacoma and fits right up against the cab.

    I used it to transport my GSP’s as well as my English pointers. The only reason I am selling is because a shoulder injury I have a hard time taking in and out when I need to use my full bed.  I need to go to single plastic dog boxes.

    The measurement is 37” x  29 1/2” x 22 1/2”. $625.00 firm pick up in Tucson.

    PM me or text Five  Two  zero 975-0830. I will respond in the order I receive message or the first person who says I will take it.

     

     

    IMG_2988.jpeg

    IMG_2987.jpeg

    IMG_2986.jpeg

    IMG_2985.jpeg

    IMG_2984.jpeg

    • Like 1

  4. Im guessing you have a 8x57 JS chambered rifle. If a round chambers I bet you have the correct ammo. I would just slug it to be sure. ( an ounce of prevention is worth more than a pound of cure. Good luck looks like a fun rifle.

     


  5. If you were in Tucson I would be happy to make a chamber casting and slug the barrel. I can walk you through slugging the barrel. Just use a lead cast bullet larger than the rifle bore. Use a little lubricant and a short wood dowel to start the slug into the bore,  and use the long dowel to tap the slug through the bore. I use a set of dial calipers to measure the slug. You can then determine the slug diameter. 

     

    • Like 5

  6. The best and safest way to determine what cartridge it takes is to do a chamber cast. I also always slug the barrel. Not hard to do and actually kind of neat to learn to do this. 
    It very well may be 8x57. I copied this for information. This better details the differences. 
    i recently camber cast and slugged the barrel of a friends rifle, a Combination German rifle.
    His rifle was actually another cartridge of 8x57. I was determined to be a 8x57 JR . A rimmed cartridge.
     

     8x57JS, the "J-bore", was the original chambering for the Mauser. It had a bullet diameter of .318 inches and was a round nose deisgn. The 8x57IS, referred to as the "S-bore" was the later chambering with a new spitzer bullet with a diameter of .323 inches. Early rifles chambered for the J-bore and subsequently modified to fire the larger S-bore were stamped with a "S" on the receiver to indicate the change.


  7. Im selling my  Winchester Big Bore 94 XTR .375. Excellent condition for a 45 year old rifle. Includes a box of ammunition, with 17 live rounds and 3 fired cases.

    I live in Tucson. $1200  reduced $1100 picked up at my home. I can ship to your FFL at actual cost. Feel free to contact me by PM or text me at 520-975-0830 and we can discuss any questions you might have.

    This will make an excellent Elk or bear rifle. I had purchased this to shoot my cow elk but ended up using my Winchester 50-110. Need to pass along rifles I no longer shoot.

    IMG_2841.jpeg

    IMG_2842.jpeg

    IMG_2843.jpeg

    IMG_2844.jpeg

    IMG_2845.jpeg

    IMG_2846.jpeg

    IMG_2847.jpeg

    IMG_2848.jpeg

    IMG_2849.jpeg

    IMG_2850.jpeg

    IMG_2863.jpeg

    • Like 4

  8. SOLD

    MOVED TO EBAY
    I am selling my Swarovski AT 80 angled scope and 20x60 lens. The scope has sat in the safe for over 20 years. New in the box and  It has never been used. 
    i have decided that I will never use it as I am not getting any younger and am now trying to reduce the weight I will carry in my pack. I have already sold my 15x56’s and plan on going with a par of Swarovski 12x48 Purs. 
    I will also ship to any member that has history on the Forum. Sorry will not ship if you are a new member with no history. 100% guaranteed.

    I will sell in the order I receive PM’s. Or the first person who states they will take it.

    $1500  Price reduced $1250

     

     

     

    Thanks Phil

    IMG_2736.jpeg

    IMG_2735.jpeg

    IMG_2737.jpeg

    IMG_2738.jpeg

    IMG_2838.jpeg

    IMG_2839.jpeg

×