azsugarbear

I know some of you guys have bought after-market shrouds for your Tikka's you aren't using anymore. I painted my oem shroud, then put it away to dry while I went on vacation. Now I'm back and can't remember where I put it. I want to do some load development now, so I need to get another shroud painted and on my rifle. Just as soon as I buy one, I know I will find my old one - just how it goes. Let me know what you want for yours.

I appreciate the offer. Working with someone in Phx. area. If that falls through, I will contact you.

Using some down time to slowly clear off the reloading bench. I have 53 once-fired R-P brass in 300 RUM for sale. They were deprimed and resized, but never loaded a second time. I switched over to Norma brass several years ago, and these got shoved to the side somehow. Need to find them a new home. Price is $50. Not looking for trades. Low-ballers walk on by. First "I'll Take It" in the comments section trumps all PM's and text messages. That way, everything is in the open for all to see. Nobody fets to use the back door to snipe a deal that someone has already pledged to complete. Karl: 602-361-7191.

There are only a few powders that work well with the 300 BO. I believe H110 is one and the other is Lil' Gun. Both are right next to each other on the powder burn rate chart. I have some extra Lil' Gun, if you want to trade.

I have a near new Tikka action for sale. It started life as a 300 WSM, so it has the magnum bolt face with the medium length action. As most of you know, this same action can be converted to long or a short action by simply changing the magazine and the bolt stop. Since I intended to keep this action for a second custom build, I did a few extras such as the bolt fluting ($60 cost), plus the upgraded trigger spring kit. If I can't recoup the cost I have in it, then I will just hang onto it for a second build. It comes with everything you see in the pictures: the action, fluted bolt, factory bottom metal and medium magazine. One of the pictures also shows the clean/perfect action face for those who are wanting to do a shoulder pre-fit barrel. I am firm on price of $600. This may seem like a lot to some of you, but you need to consider the initial cost of the rifle, the shipping and FFL fees, the cost of the extras and the cost of having the barrel removed from the action. Not looking for any trades at this time. Low-ballers - please ignore ad. The first "I'll take it" posted in the thread trumps any PMs, or text messages. Send a PM or call/text Karl at 602-361-7191 with any questions or comments you have.

It was a pleasure. Positive feedback was left for you in the Good Buyer thread.

So I Hunt is a top notch Buyer in my book. Bought an action from me. Great communication. Straight forward transaction. All-around great guy.

Sale Pending.

Did you find your Varget? If not, I may be able to help,

I have 100 count of new 300 RUM brass from Norma that I will probably never use. CWT always gets first shot on anything I am selling. Asking $150. Not looking for trades. No lowball offers. Don't need to sell these, but won't be using them for quite some time. First "I'll take it" in this thread trumps any PM's. This way, nobody gets to snipe your offer or turn it into an auction. That's just the way I roll. Everything out in the open for all to see. You can PM, text or call Karl at 602-361-7191.

SPF to Vowell.

Just a heads up: Red Hawk Rifles is having a flash sale on the Grayboe Terrain and Outlander models. Sale is limited to stock on hand. Offered at about 40% off retail.

This is a custom-made fire kettle that was initially made for Rev War & Mountain Man re-enactments. Not into that as much any more, but I still use it now and then for camping, cooking and general relaxing. Now with the grandkids all moved out of state, it just sits in the garage. Time for it to find a new home. When set up, it measure 24" tall and 24" in diameter. It has a three piece grate that makes for a smooth cooking top. When not in use, both the grates and the stand fit inside the kettle for compact storage. This is well made with heavier gauge steel and will outlive all of us. kept me warm on many a night. Asking $250. First "I'll take it" trumps any PM or text messages. That way, everybody knows who was first in line. Use PM and Text for any questions you may have. Not looking for any trades at this time. Karl 602-361-7191.

Clearing off the bench. Sightron scopes don't typically have the name recognition that some of the other manufacturers do. They don't advertise much, but what they do - is make a great scope for the dollar invested. They are best known for the clarity of their glass and repeatability of their turrets. This scope has a 30mm tube and allows for 100 MOA of travel for elevation. The reticle has 2moa stadia. It is a rugged, well-built scope that always returns to zero after dial-up. Read the reviews and look at the customer ratings on the various sites that sell these scopes. The Mark 4 rings are fitted for a picatinny rail. Asking $650 for both the scope and rings; or $600 for just the scope. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx - near Tatum & Bell

Scope & rings - SPF

HYNOON gets another thumbs up. Smooth transaction. Easy to deal with. Great communication.

Need to make more room in the garage. Selling my portable shooting table. I honestly can't remember where I bought this, but I have used it for nearly ten years so it has some bumps and nicks. It is lightweight, portable, has a built-in handle and stores well. Has no-slide, non-glare surface. Will support a lot of weight. Asking $60. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx area near Tatum & Bell Road.

SPF to HyNoon.

North Phx. - added location to description.

Used these on an antelope hunt in WY last year. Probably won't hunt up there again - and Lord knows If I will ever draw another antelope tag here in AZ. Need to clear off some shelf space in the garage, so these need to go to someone with an antelope hunt in their future. This is the combo package: young adult buck frontal and half body feeding doe. Asking $75. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx - near Tatum & Bell

I have an extra Sightron SIII 6-24x50 sitting in Leupold Mark 4 rings on my bench right now. It is a SFP scope with MOA stadia in a 30mm tube which gives you 100 MOA of travel. These scopes are best known for their extremely clear glass and reliable turrets for repeatable dial up and down. I still have the same model on my custom 6.5-06 AI rifle. Rugged, durable, excellent quality. Read about them here: https://sightronusa.com/riflescopes/siii-lr-series/ You should also read several online reviews and pay particular attention to the ratings that customers give these scopes. The scope usually retails for $800 or so. The rings go for $100+ when new. My price would be $650 for everything, or $600 for just the scope. This is a little higher quality than you can afford on your budget, but if you can stretch a little you will end up with something you will never have to upgrade down the road.

I have a semi-custom Remington Model 7 I need to sell. Custom barrel set up to shoot 105 gr. Bergers.

I'll take the IMR 7828. PM sent.

Left out of description: The barrel is a Benchmark SS fluted barrel with #4 contour (0.665 at the muzzle).

Specifying 7mm doesn't tell us anything about the required bolt face. It could be either a standard bolt face (7mm-08, etc.) or a magnum bolt face (7mm RM, 28 Nosler). Free bump.