azsugarbear

I'm assuming the caliber is 7.62 Nato/308?

Up for sale are 10 boxes of Remington 30-36 Core-Lokt 180 gr. ammo. Cheapest price I could find on line was $28/box, plus shipping and taxes. Asking price is $250 for all ten boxes (that works out to be $25/box). Live in the N Phx area near Tatum & Bell roads.

A good friend of mine has some medical bills that need to paid. He has asked me to help him sell a couple of firearms. All of the firearms I am listing are in my possession and I will be handing off the firearm(s) and standing behind each transaction. My friend needs to raise some cash and feels that this is his best way to do that - otherwise he would not be selling them. Accordingly, no trades can be entertained. For Sale: Brand new, never been fired Marlin model 1895 SBL in 45-70. This rifle was manufactured in late 2024 and purchased new in 2025. The rifle is a stainless steel model with laminated stock. The barrel is 19.1" in length and threaded (11/16-24) for the muzzle device of your choosing. The rifle also has an aftermarket, ectended picatrinny rail. I would rate this rifle 98 out of 100. The package includes the rifle, a soft case and two (2) 20 round boxes of Double Tap 405 gr. hard cast solid bullets (valued at $50/box). I checked online with gunbroker, Bud's gun shop and a few other retailers. Most stores were out of stock. The lowest base price I could find was $1,225 (before shipping of $70 snd taxes of $105). So lowest final price: $1,410. Asking price: $1,200 for the rifle, case and ammo The seller will entertain offers, but they need to be fair. Any questions you have regarding the rifle - please post them in this thred. Any offers can be sent to me via PM. I am located in the N Phx/ Sctsdl area.

Rifle has been sold.

Tifle has been sold.

A good friend of mine has some medical bills that need to paid. He has asked me to help him sell a couple of firearms. All of the firearms I am listing are in my possession and I will be handing off the firearm(s) and standing behind each transaction. My friend needs to raise some cash and feels that this is his best way to do that - otherwise he would not be selling them. Accordingly, no trades can be entertained. For Sale: Very gently used Ruger M77 Mark II in 30-06. This was purchased new a couple of years ago and has 40 rounds down the barrel. The rifle is stainless steel with a laminate stock. The action/barrel have a satin mirror finish. I could not find a single scratch and only one very tiny marr beneath the rear, left scope mount. The stock has no dents, scratches or dings of any kind that I coujld see with my tired old eyes. The rifle comes with 1" rings and a Leupold Rifleman 3-9x40 scope. Also included with the sale is a hard case and leather sling I would rate this rifle a 96/100, but you will have to decide for yourself. Looking online, the cheapest used Ruger M77 rifle I could find was $750 (plus $45 shipping and est. taxes of $70), bringing the final total to: $865. And I doubt that the condition of that rifle was anywhere close to this 30-06. Asking price: $850 for the rifle, Leupold scope, case and sling. The successful buyer will also have the right of first refusal on 10 boxes ($120 rounds) of Remington Core-Lokt 180 gr. 30-06 ammo at $15/box. The seller will entertain offers, but they need to be fair. Any questions you have regarding the rifle - please post them in this thred. Any offers can be sent to me via PM. I am located in the N Phx/ Sctsdl area.

Pistol has been sold.

A good friend of mine has some medical bills that need to paid. He has asked me to help him sell a couple of firearms. All of the firearms I am listing are in my possession and I will be handing off the firearm(s) and standing behind each transaction. My friend needs to raise some cash and feels that this is his best way to do that - otherwise he would not be selling them. Accordingly, no trades can be entertained. ***** Updated 2/21/26 Note: I was not aware at the time this pistol was put up for sale, but after the initial purchase, the owner sent this pistol back to the S&W Custom Shop for a complete trigger job - which included slicking up the timing components as well. That's probably why the trigger felt so light to me. For Sale: The iconic Smith & Wesson Model 686-3 in stainless steel. This pistol was manufactured somewhwere between 1988 - 1993. For those of you not fsmiliar with this revolver: like most 357 Mag revolvers, the cyclinder can also accomadate 38 Special ammo as well. The pistol is all 'original', right down to the wood grips. From my examination, I can tell you it indexes correctly and the cylinder locks up tight - aligning directly with the forcing cone. For its' age, it is in great condition. It shows that the previous owners have tken great care of it. The finish is surprisingly pristine with no scrathes, dents or dings - with the exception of the cylinder itself. It has the faintest engraving/marring that usually occurs when the cylinder is spun and the quickly locked into place by pulling the hammer back. You know what I'm talking about.... the thing we all did as kids because we saw it done in the movies - and it looked cool. The trigger itself is extremely light and I would estimate the pull to be around 1 lb. This 686 package comes with a suede pistol rug, a leather ammo pouch and two holsters. The black leather holster is a western rig made in Mexico (value $125 when new??). The other medium brown holster was made by Bianchi and has the typical thumb release strap (value today for this model is $200). Both holsters could use some oil to bring them back to their full luster. This pistol was hard to value. Looking online, I found prices all over the map, depending largely on the condition and the series of the 686 that was for sale. You will have to do your own research on this one. Asking price: $900 for the revolver, two holsters and the pistol rug. The seller will entertain offers, but they need to be fair. Any questions you have regarding the rifle - please post them in this thred. Any offers can be sent to me via PM. I am located in the N Phx/ Sctsdl area.

No box or tags, just what is shown in the picture. This rifle has never been fired, If he had the box and tags, the asking price would be more in line with gunbroker comps of $1,300 before shipping and taxes. He feels he is giving a $200 dollar discount for not having the box or tags, butincludingh the $100 in ammo.

Weekend bump. If you are interested give an offer.

Weekend bump. If you are interested, give me an offer.

Weekend bump. If you are interested, give me an offer.

I'll take this. I'm in your neighborhood. Will send PM.

Could you be more specific? Carboard boxes of twenty, or maybe the plastic cases that hold 20 to 50 depending on caliber? Older, collectable ammo boxes and cams? I have a plastic box that holds either 50 or 100 12 ga. shells. I have 5-6 brand new plastic boxes that hold 20 rounds each of 6.5PRC. That kind of stuff?

SOLD.

Just delivered from Proof Research. Another project I need to walk away from to cover some taxidermy bills I have coming due. This is a new, carbon fiber 24" barrel blank in 7mm (.284) caliber. It has the Sendero profile with a 1.20" diameter shank and a 1 in 8" twist (model #106501). Not looking for any trades at this time. Barrel retails for $999 on their website. Asking Price: $725. Located in the north Phx / Scttsdale area near Tatum & Bell Road. Now: $700 OBO.

Price reduction: now $700 or offer.

TTT

I 'm putting up for sale a brand new Proof Research carbon fiber barrel blank in 7mm (.284) with a 1 in 8" twist. Length is 24 inches. The barrel contour is their 'Sendero' profile model #106501 with 1.2" shank. Proof has earned the reputatiuon for putting out very accurate CF barrels for many years now. I need to raise so cash, so this is on the block. Price is $725, which is well below retail. Not looking for trades. Live near Tatum & the 101 Loop in N. Phx.

I'll take this.

Oooops. I missed the part about the primers being magnums. I only need regular pistol primers. However, I would also like to add the CCI reg. rifle primers #34 to my Fed reg, rifle primer list, if they are still available.

I'll take the following: CCI Sm Rifle Primers 600 ct. CCI Lg Pistol Primers 1000 ct. Fed Lg Rifle 200 ct.

I have 3 different Tikka actions for sale. All are right-handed and blued: 1) Tikka short action w/standard bolt face and completely stock $625 2) Tikka short action w/magnum bolt face and completely stock $625 3) Tikka long action w/madnum bolt face, stock, except for fluted bolt done by LRI $700 All actions come complete with action body, bolt, trigger, bottom composite piece and requisit 3-round magazine. Pics available, but didn't seem necessary as the all look the same. I can send you pics upon request. Located in N Scottsdale/Phoenix area near 101 Loop and 56th Street.

I appreciate the offer. I'm trying to sell off some of my extra stuff because I got drawn for a desert bighorn sheep hunt this December.

ttt