az41mag

Darn good buck! thanks for posting! Side question, does the triclawps change your point of impact much?

I've got a partial 1 pounder left over from some load development if that helps any. A few years old, but was stored inside.

Lots of good ideas posted here. One thing I will add is that when I ended up building my own, I intentionally made it 37" high to the top of the bench. This allows me to either stand or sit (with a tall shop chair), while doing tasks at the bench. I found that to be helpful for me since I sometimes like to stand while trimming brass on a hand trimmer if it's just a small batch. As others have stated you will want something with a heavy top that is sturdy and won't wobble every time you resize a piece of brass.

TTT

Barnes bullets and sabots are SOLD. Make an offer on the pellets... they need to go

Yep, everything still available.

To the top and lowered price

Bump

I'm about to be in the market for a quad / atv for hunting, and was looking for some advice on which brand and size to go with. Kind of looking at the Polaris Sportsman 570 or similar just because it seems to be a mid size, and not really sure if I need anything bigger or not. My use would just be for getting down roads too nasty for the pickup. Any brands or things to stay away from? Any must have accessories for hunting that I should also look for? Thanks in advance.

Thanks for all the input so far guys, much appreciated. Sounds like I should look at the Honda's too.

Second for Fullerform. They are great to work with and happy to order things that aren't in stock. Are you looking for waterman or fresno?

Where are you located?

What is the barrel length and choke type on the model 48?

I sharpen my own. A worksharp is good and works very fast, I like it for kitchen and steak knifes. For my hunting knives I use a Blademaster honing kit. It uses a clamping system with a guide rod on the stone handle that helps you maintain a more consistent angle on your knife edge. It is a slow process and takes some getting used to, but I feel like you can get very precise edge on your blade with that system.

357 brass is spoken for. 9mm and 380 is still available. All gone. Thx

Was given a box of goodies and have no use for this brass. Has 357 Mag (mostly nickle), 9mm luger and a little 380. Mixed headstamps and no idea how much it was used. Free if anyone can use it. Located in Maricopa

Another vote for Little Creek Calls. They are well made, have great sound, and it's always nice to support someone local.

I'll take the lapping kit and the outdoor edge knife. PM on it's way.

How is the trout fishing this time of year at Parker Canyon? The stocking schedule shows it being stocked through the winter months, but I've never fished it before. Just looking for a trout spot until the northern lakes get going again.

I'll give that a try. Thanks

Your list looks good. A few things I carry in addition to most of the stuff you listed is a small 12V air compressor for tires, jumper cables and/or rechargeable booster pack, and a small collection of wire crimp connectors for emergency electrical repairs.

I've been trying to figure out an umbrella system for the exact same thing, but haven't found one I like yet. I appreciate the insight and will have to try one with a longer handle to go down in my pack. Thanks!

Well done! What's your setup for the umbrella in the first picture? (at least it looks like an umbrella)

For you guys with late season hunts, selling 2 sets of tire chains. Boxes are a little beat up but they're unused. Shipping would be cost prohibitive, so pick up only in Maricopa. Asking $40 $25 for all.

They're SPF to Zonalivn. WT hunter, you're second in line if it falls through. Thx