azhuntnut

How many miles?

This rifle is brand new and built in 2013. It was made here in Arizona and I like the fact the serial is number 48. Arizona was the 48th state excepted to the union. Just an fyi. Hogan was the manufacturer for POF and GA Precision. They built the parts and those companies assembled sold the rifle under their name. Hogan started building there own rifles in 2012 for a couple years before a lawsuit was filed by POF. This is basically a POF P308. I planned on using this for hunting, but recently bought a POF chambered in .308. Description: H308 Short stroke gas trap piston operated. Barrel is a Rock Creek barrel blank. 1:10 twist, 7.62NATO chamber, medium contour, melonite heat treated barrel and gas piston system. Upper receiver is Free floating Monolithic upper with rail system. Black mil spec type3 hard coat anodized with Nickel plating inside, or NP3. Made from 7075 billet aluminum. Rev-X forearm: Rails bolt on at the 3,6,9 O’clock positions. Two styles are available, Tactical and Hunter. Tactical rail: Top rail is monolithic from front of forearm to back of upper receiver. Hunter rail: Top rail is dip cut for larger bell optics to clear with lower mount rings for better ergonomics. Bolt Carrier Group, bolt is chrome, carrier is one piece design for Piston use, electro less nickel plated. Lower is Hogan MFG design Billet 7075 aluminum with integrated trigger floor plate, and ambi bolt release. Black mil spec type3 hard coat anodized, or NP3. Hogan Gold Standard Trigger installed with KNS anti-rotation pins. Clean 4.5# single stage match trigger. Ambi selector installed. H3 carbine buffer, Wolffe 308 carbine spring. New X-brake muzzle device with jam nut. Hogan MFG. machines the Upper and Lower receivers from 7075 billet aluminum. We make the bolt, bolt carrier, charging handle, gas manifold, gas plug, gas piston, barrel nut, rail system, and all the detents and pins used in the lower parts kit. The barrel is a Rock Creek barrel blank, chambered, contoured, and fluted by Hogan MFG. Heat treat and anodize is all done right here in AZ. Magpul PRS adjustable stock and one 20 round magazine. Located in north Peoria. $2200 and I would entertain trading for Swarovski NL optics or silver coins. David

10.2 LBZ. The Magpul PRS stock on this rifle is close to 2 lbz. I just installed a magpul lite on my new rifle that weighs 18oz.

I think this rifle started as a Remington sps bull barrel left hand chambered in .308. It has a 18 inch barrel, and brake makes it about 20. The prior owner had a muzzle brake installed and the trigger feels like it is also after market. I installed it into an MDT ACC chassis. I also bedded the scope rail, installed MDT grip, Luth AR adjustable stock, and Aristotle Engineering LOC JAW tripod mount. This chassis also has the Arca rail and multiple attachment point. Oversized bolt knob. I have not seen too many of this model rifle in left hand action with a bull barrel. It is just as accurate as my full custom built Creedmoor. I have included target pics from first day out testing loads. It is crazy accurate with Hornady 168 eld-m’s at 2600fps. I have killed a muley and bear with the rifle. It is ready to hunt, or if you want to get into PRS competition's. Scope, rings, and tripod not included. I have some hand loads I will include. Located in north Peoria. $1600 David

I have a couple factory stocks available for this rifle if someone doesn’t prefer the chassis.

I was going through some of my old stock the others day and found a couple of our first generation Loc Jaws. They work the same as our new ones, but are a little longer. I have two of them, so I would like to give one each to whomever claims it and gets involved with the pay it forward. David

New Redding Master Hunter-28428 dies- $175 New Hornady .280AI brass- $50 New Hornady 162 SST- $40 each New open box Hmmer hunters 143g. I opened these to measure. 100 box- $100 North Peoria- David

Only the gauges.

I recently reorganized my hunting room. I will do my best to describe each product. Located in North Peoria. 1) NEW Under Armour winter overalls and jacket. Very warm material. Both are large. $150 2) All 3 hunting jackets do different sizes. $50 3) 4 paired of pants. The REM multigaurd pants fit big. I used to wear them over my hunting cloths while riding my quad. 2 pits are 34-36 $50 4) Trophy Ridge digital React. Had this on my back up bow. Works great. For you guys loosing some of your eye sight, the screen is much easier to see. $175 5) SOLD- Niko M223. This was a display scope. Cantilever mount included. 4-12x40 $100 6) Manfrotto fluid window mount. $50 7) Trophy Ridge inline 4 pin. $40 8 SOLD-Nikon rifle hunter 1000 range. $30 9) Blue plastic molded Glock display pistols. These were used to display pistol lights $40 each 10) Plastic molded AR-15 display rifles. Used to display rifle scopes. $120 each 11) New Dave Manson Reamers .280AI 40 degree Go-No Go gauges. $80 12) Leather belt with holster for .44 or .45. Very thick leather belt and nice design. I got this at least 25 years ago. $100 13) New hats. I attend a few banquets a year and acquire lots of hats. All for $30

Top

This is a takeoff from a left hand Savage 110 precision rifle. Also includes grip, and the bolts to install the action. There was a bag rider installed at one point in the bottom of the stock. This is for a Savage left hand short action. FDE Cerakote. $375. obo- Located in North Peoria. David i have removed the adjustable stock. This is just for the chassis and grip

Top

Top

I started this build with an older Savage donor. All these parts are new. Precision machined barrel nut and recoil lug. Oversized bolt handle. Muzzle brakes and more 5 port brake. 20 MOA Picatinny rail that has been bedded. I am not sure if it has an aftermarket trigger, but it has a clean break and feels close to 5lbs. I bought the Proof Research barrel from another member chambered in .280AI. I am pretty sure he stated he had less than 250 rounds down the barrel. I also have a bore scope if someone would like to view the inside of the barrel. I polished the inside of the action where the lugs lock. It is super smooth now. The donor rifle came in a Stockade stock that is included. I was going to install it in a chassis, but just never finished it. $800. Obo/ Located in north Peoria. No trades at the moment. David Barreled action weighs 5.05lbs and the Stockade is 2.72lbs.

Have you tried annealing first? The brass is twice as thick as normal brass. I bought a bunch of 25 when sportsmans had it in stock.

I will take it. PM inbound. David

Top

Top

I bought this off ebay and the prior owner had painted it. I got most of the paint off and left the primer. He used some type of industrial primer. The chassis will fit Savage long action right or left handed actions. Located in North Peoria. $450 obo David

Top. I would also consider trading for swarovski optics. I also have the original stock for this rifle and would sell it without the chassis.

They are accepting apps for Coues, Turkey and antelope. Here are the prices for this year. David

I have done business with Mike several times. Buy with confidence. David

Price reduced $375 i have removed the adjustable stock. This is just for the chassis and grip

Top