Couesdeer

Weaver is sold.

BTT Lets go $575 on the Ares and $425 on the Helos

SOLD

I put this together over the spring and have shot it a couple of times. Remington 700 SA Receiver 20" ultralight contour barrel chambered in .243. 1-9" twist. .550" Muzzle Dia. 1st gen Remington Ti takeoff ADL stock green with black webbing (there is a scratch on the right side of the butt-pictured)Trigger tuned to break at a hair over 2 lbs. 13.5" LOP Mil Spec Olive Drab Cerakote Weigh 6lb, 1 oz as it sits. Round count is 38. Mostly barrel break in and a few loads with Reloader 17 and 105 gr Amaxes. Shot very well (A little better than .75" when allowing the barrel to cool as much as I could in the southern AZ heat in July.) $850 FTF Catallina/OV/ North Tucson area. Will ship at cost.

BTT

Fantastic bullet for the 7-08. I load this bullet for my rifle as well as three others. Kills out to and past 500 yards. Three cow elk as well from 80 to 250 yards. They have always exited too. They actually have a stouter jacket than the 140 gr BTs. my understanding is that Nosler uses the same copper blanks for the 120s and 140s. The 120 don't need to be extruded to the length the 140s do. This gives them a thicker jacket. If you do load them in your 7/08, I have found that Varget is a fantastic powder for the combo.

BTT

This is a great deal.....

Fantastic pics! I spent 4 summers working in the park when I got out of college. Loved every minute there.

Sold

This is a very nice Kimber 84M Select Grade chambered in 308 Win. Purchased new in 2021. This rifle is unfired. As new condition. Cut and paste specs from Kimber's website: Specifications Approximate weight (pounds/ounces): 5/10 Overall length (inches): 41.25 Barrel Material: Steel Finish: Matte blue Contour: Sporter Length (inches): 22 Twist rate (right hand): 12 Grooves: 4 Match grade chamber Trigger Adjustable Factory setting (pounds): 3.5-4 Stock Material: A-grade French walnut Finish: Hand-rubbed oil Checkering: Panel, 20 lines-per-inch Length of pull (inches): 13.63 Drop at heel (inches): 0.54 Drop at comb (inches): 0.43 Recoil pad: 1-inch Pachmayr Decelerator Ebony forend tip Sling swivel studs Steel grip cap Pillar bedding Glass bedding Action Type: 84M Material: Steel Finish: Matte black Magazine capacity: 5 Front locking repeater Mauser claw extractor 3-position Model 70-type wing safety $1200

I will take the 2.5-8

BTT

$800

Looking through my old posts and came across this.... Almost seven years ago! We still have Cleo. She is family.... And yes, she does have a partner in crime.

$1150

SOLD

Leupold FX3 fixed 6X42 scope Matte, wide duplex, 1" tube As new condition with original box. $300 North Tucson/Catalina/OV I will ship at buyer's expense.

BTT

Back Up

Back up.

Sako L579 chambered in 308 win. S/N research indicates that this one was produced in 1966 or 67. It is a custom. the fellow that I purchased this from said that his uncle had it built in the late 70s for his wife to shoot. He has no idea of the builder or the manufacturer of the barrel. Nice maple stock 26" heavier than average contour barrel (muzzle dia: .680") borescoping shows no evidence of throat erosion and nice sharp rifling throughout. 1-10" twist Nice bedding job (much cleaner than I have ever done myself!) 13" Length of pull Bluing is darn near perfect. Weighs exactly 8lbs as pictured. Trigger is crisp and breaks just over 2.5lbs. It has been drilled and tapped on the receiver. I don't know Sakos that well, but that does not look factory. As mentioned the LOP is a bit short. I have not fired this rifle because I do not have rings to fit the action. The previous owner did say that the rifle shot really well, for whatever that is worth. $1100 Catalina/OV/North Tucson area

$1050

I will sell the barreled action in a black factory injection molded Remington ADL stock for $600

Maybe you could buy it from him and donate it to a youth hunting group.....