Tikka T3x 300WM with stainless Proof barrel

[mp_moody]

Used Tikka T3x in 300 Winchester Magnum. This rifle was purchased off of this site by a friend who then sold it to me. In 2020, I purchased a new Proof Research prefit stainless steel barrel and had AxisWorks in Tempe remove the old barrel and then thread and install the new barrel. 1/2x28 threads with a blended brake.

Barrel specs: 11 degree crown, 1:10 twist, 24" long, light (sporter) contour.

https://i.imgur.com/fRvXaY7.jpeg

https://i.imgur.com/ehJvmDS.jpeg

https://i.imgur.com/eK3C9xz.jpeg

https://i.imgur.com/j09KARB.jpeg

Plastic synthetic stock has a Limbsaver recoil pad. I added a Mountain Tactical/Tikka Performance 20MOA picatinny rail, long action bolt stop, and a Yodave trigger spring.

Full disclosure: I did have a different aftermarket bottom metal that required me to inlet via dremel the inside of the stock. I've attached pictures and the modifications in no way affect anything:

https://i.imgur.com/ku3jOeR.jpeg

https://i.imgur.com/lXIVLuw.jpeg

I've put approximately thirty rounds down the tube zeroing, developing a load, and then verifying zero.

The only reason I'm selling this rifle is because I've been single loading my 215gr Bergers through the ejection port. This rifle can shoot but you are limited to 3.4" COAL. Great rifle if you don't reload and like to shoot factory stuff. 

I'm asking $1200 for this rifle. I'll entertain reasonable offers. No trades please. Everything pictured is what you get.

I'm available all weekend in the Phoenix area.

[Tclimber]

What does this rifle weight in at? Is it still available?