Jump to content
SpringChicken

6.8W browning X bolt with Burris XTR3

Recommended Posts

Just making some room in the safe and this rifle has served its purpose (bear hunt) 

Rifle is a browning X bolt speed SR, with the recoil hawg factory muzzle break chambered in 6.8 western. It has a Burris XTR 3, 3-18x50mm on it sitting in talley lightweight rings. The trigger spring has also been swapped to the MCARBO spring, pulls at roughly 3lbs. Rifle really likes the factory 175gr sierra load from browning as well as the Winchester copper impact 162’s, and Winchester nosler ABLR 165’s. Also hand loaded for this rifle and was able to close groups up to a consistent .4-.6 moa 3 shot group with 150 Berger VLD-H, as well as the 165 ABLR’s. Didn’t shoot the Berger EOL’s very well but I didn’t try too hard to make them shoot. Roughly 167 rounds down the tube. Total rifle weight is 9lb 2oz as it sits with scope/rings. 

All the brass is included 100+ pieces. As well as a factory box of Winchester ABLR’s and the remaining 165 ABLR projectiles (roughly 60 left) load data can be provided if your into that sort of thing. 

looking to get $1750 for everything. Located in N Phoenix. Text or call preferred Jason @623-670-zerothree65 

IMG_4240.jpeg

IMG_4242.jpeg

IMG_4243.jpeg

IMG_4239.jpeg

IMG_4359.jpeg

Share this post


Link to post
Share on other sites

Is the scope MIL or MOA? How much for it by itself?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×