Coach Report post Posted April 17, 2014 Posted this in the campfire because the other related forums don't get a lot of traffic. Here's the scoop. I have a Cabela's right hand Hawken flint-lock. A couple years back I was shooting it with a friend and we determined a shot had not fired. After multiple attempts to clear the barrel with C02, and other means to clear the charge, I drilled out the "frizzen hole" because it couldn't be removed any other way, only to find out there was no charge in the barrel. So I've got this barrel, in great shape but a bored out frizzen and no matching parts. Are there any good gunsmiths out there who work on black powder rifles and can fix this? The alternative is to replace the entire barrel. I've seen a couple on Ebay around $200 with shipping. This flint-lock has some history to it, and I'd like to get it back to shooting shape. Any ideas and suggestions are much appreciated. Share this post Link to post Share on other sites
elpepe25 Report post Posted April 17, 2014 See if you can get a hold of curtis25, I met him and he seemed pretty dialed on diy front stuffers Share this post Link to post Share on other sites
