FB67

Does Berger make any custom VLD's for it and what is the FPS, I am trying to get to 260fps with my loads now and I think its starting to erode the barrel any suggestions

Lance I believe the term is cabin fever probably should be called oven fever here in AZ. You need to get out and shoot something.

Bump I am open to offers

This is an American made bench vise that has been fully restored to a better then new condition, these are solid cast vise's not the junk you get at Harbor Freight. Morgan vise company is still in business today http://www.milwtool.com/v_mach.htm. All Morgan Chicago's were made before 1955 I am asking $95.00. Location Tempe Thanks for looking.

There was ZERO wind the guys I was shooting with had the Kestrel 5700 and was reading 0 to 1.1 on their meter about 70 degrees if I recall. I will say a 1 to 2 mile an hour left to right will push that bullet a tad . No wind made it much easier. PM the contact for the Brake.

Berger 210 VLD H1000 75 Grains Jumping the lands .015 Remington 700 26 inch barrel Signtron 6X24 FFP 100 Yards

In Tempe it just sold on backpage

SOLD

Not in Tucson sorry

I do l PM'ed you.

Restored Athol Bench Vise 4.5" Smooth Jaws opens to 7.5" Solid base 65 Pounds This was made in the USA around 1920. These are getting harder to come buy and are great for a work shop. I have a few others if this is to big.

What is your price

SPF

Cleaning out some things factory ammo 18 rounds 30-06 , 20 rounds 243, 15 rounds 22-250 and 19 rounds 303 British $40 OBO

Guys its sold pending funds if it falls through I will let you now.

Past gun vice used but works good $20 I am in Tempe

Don't get down that way to often if I do and I still have it I will let you know

Nightforce rings Seekin rings Nightforce rail and Leuplod rail. All have been great.

Everyone talking about there wing wongs I thought I hit a differnt forum and was going to have a rainbow sticker sent to me or something ( O yea I am hung like a light switch so there )

I have 4 Remington's three 700's in 300 win 308 and 223 and a 660 in 308 they are all capable of shooting under 1 MOA and the 300 and 308 700's under a 1/2 MOA or better ( all depends on the shooter) So I would say go with a Remington because I am biased. That being said I have never owned a Savage but shot one a few times and it shot great. I have been told by a lot of shooters that they are very accurate and they swear by them, but there is something about the style I just can't warm up too.

I have a great idea buy both of them and what ever one you don't want sell to me for half price

It is a VAIS Break that was machined and installed by a member from this site. Here is a pic of it and some pics of some steel we shot at 1125 yards, the three larger splashes are from the 300 WIN it took 7 shots to get there but a ton of fun to hit from that range, that was the first time I shot past 600 yards. It is addicting.

Had a break installed on the 300 WM feels like a 308 now😀Here are 20 shots with the new break Center group is 200 grain SMK with 75 grains of IMR 7828 the rest are Berger 210 LRBT with 75 grains of h1000. Second group was top left then adjust to center and left it 1 MOA high

Sent you a pm

I would not count out Sightron III 6x24 I have one and a Vortex PST 6x24 and for me the Sightron glass is a cleaner picture. Here are some results at 1125 yards, the three larger splashes are from the 300 win. It took me 7 rounds to get on steel with a guy spotting for me but I was thrilled. One word of advice when your spotter csays your 3.5 MOA right adjust to the left not right, if not you will miss 7 MOA right😳