FB67

RCBS Brass prep tooL RCBS 5-10 scale Lee Reloading Kit for 270 Winchester $75 for all of it. location Scottsdale can meet in Phoenix

Bump

I will take them

6.5x284 Redding Deluxe dies these are in great shape only reason I am selling is because I have two sets. Sold Location Scottsdale can meet in Phoenix

Thanks Rugermack I Figured the price is fair and hope someone can use it.

I believe it will fit a Mark II or Hawkeye they are the same action .

Forgot to add it’s not bedded make a offer

It is aluminum and grip and for-end are polymer

Few tweaks and getting used to the AI platform and two stage trigger and I found the load. It’s not super fast but it should get the job done out to 1200 yards. 140 Berger Hybird .025 off jam 38.1 grains of N550 2750 FPS This 5 shot group at 100 yards was around 1/2 inch maybe less didn’t measure but I am happy with it.

Berger 140 hybrid targets Vitavori N550 started at 37.5 grains worked up to 38.1

Worked up a few loads for the AI think I am getting close. Bottom right and top left are decent. The wind was inconsistent so still have a little more work to do but I am almost there.

Thanks Caliber 6.5x47 24"barrel AXSA model so barrel swaps are easy. 20 MOA rail Small Firing pin. Color is Dark Earth Scope is S&B 5x25 PMII CCW FFP SPUHR 4002 scope mount MG10 RexSilentium Suppressor ATLAS Bipod Weight naked is 13.2 # as shown 17.0 # For everyone who will tell me this ......yes it is heavy yes lugging it up and down hills would be hard

I will take a case

How much is it

Yes that is with it suppressed . Thanks

Eric and his team did another excellent job on a 6.5x47 they built me. 1. BATS VR action 2 Proof 24inch 7.5 twist light Sendero 3. McMillan A3-5 Stock 4. Trigger Tech trigger 5. Axis works bottom metal 6. Scope S&B PM II Weight is right at 11 pounds

It wasn’t bad on Sunday walked right in

I have two boxes and will be working up a load for it also have 8 pounds of 4350 We were out at Cowtown with the 6.5x47 and at 1080 it was on point. I am really enjoying this rifle been using my suppressor on it that I bought for the 300 WIN it’s like shooting a 22.

I did some load testing this weekend not that I needed to just wanted to try out a hotter load. I had pushed a few powders through the rifle and am very happy with VV N550. I wanted to push it past 37.8 gr. because that was as hot of a load with N550 I had ran and the groups opened up a bit at 37.8gr. I figured I would try 38.0gr. just to see if it might tighten up and pick up some speed well it didn’t tighten up. I am sticking with 37.5gr. These are three shot groups at 100 yards and 37.5 gr. makes it crazy accurate.

Look at the Zeiss V6. 3x18 x50. I have one on a 300 win and it is crystal clear and tracks great

Where are you located

Berger 140gr. long range target. Pushing it with 37.5 gr of Vhitvori N550 with CCI BR primers . 030 off jam.

Sorry for the cockeyed PIC here is the speeds I am getting from the 6.5x47 the s-d is good so real happy with my loads. When I pushed it faster my groups opened up a bit so going to leave it right here. We had it out to 1080 a few times now and I am very happy with this rifle 😀

Wilton 600 S vise weighs 140 pounds 6 inch jaws. It has been cleaned, repainted, and the spindle is lubed, this style has the jaws attached from the rear. Welders, fabricators machinist heavy equipment operators etc, if you need a vise that will last forever and don't want Chinese junk this should do it. Asking $850........... this vise retails for $1800 new. Location Scottsdale or Phoenix.

I hear ya the price seems high until you have to buy one brand new then it is less then half. Like anything if it is something you use everyday and need and depend on it to make money the price is very reasonable, if you want it to hold a lawnmower blade to sharpen probably not what you need.