FB67

How much is it

Eric and his team did another excellent job on a 6.5x47 they built me. 1. BATS VR action 2 Proof 24inch 7.5 twist light Sendero 3. McMillan A3-5 Stock 4. Trigger Tech trigger 5. Axis works bottom metal 6. Scope S&B PM II Weight is right at 11 pounds

Yes that is with it suppressed . Thanks

It wasn’t bad on Sunday walked right in

I have two boxes and will be working up a load for it also have 8 pounds of 4350 We were out at Cowtown with the 6.5x47 and at 1080 it was on point. I am really enjoying this rifle been using my suppressor on it that I bought for the 300 WIN it’s like shooting a 22.

I did some load testing this weekend not that I needed to just wanted to try out a hotter load. I had pushed a few powders through the rifle and am very happy with VV N550. I wanted to push it past 37.8 gr. because that was as hot of a load with N550 I had ran and the groups opened up a bit at 37.8gr. I figured I would try 38.0gr. just to see if it might tighten up and pick up some speed well it didn’t tighten up. I am sticking with 37.5gr. These are three shot groups at 100 yards and 37.5 gr. makes it crazy accurate.

Look at the Zeiss V6. 3x18 x50. I have one on a 300 win and it is crystal clear and tracks great

Where are you located

Berger 140gr. long range target. Pushing it with 37.5 gr of Vhitvori N550 with CCI BR primers . 030 off jam.

Sorry for the cockeyed PIC here is the speeds I am getting from the 6.5x47 the s-d is good so real happy with my loads. When I pushed it faster my groups opened up a bit so going to leave it right here. We had it out to 1080 a few times now and I am very happy with this rifle 😀

Wilton 600 S vise weighs 140 pounds 6 inch jaws. It has been cleaned, repainted, and the spindle is lubed, this style has the jaws attached from the rear. Welders, fabricators machinist heavy equipment operators etc, if you need a vise that will last forever and don't want Chinese junk this should do it. Asking $850........... this vise retails for $1800 new. Location Scottsdale or Phoenix.

I hear ya the price seems high until you have to buy one brand new then it is less then half. Like anything if it is something you use everyday and need and depend on it to make money the price is very reasonable, if you want it to hold a lawnmower blade to sharpen probably not what you need.

Thanks for the free bump it is one of the best vises Wilton makes.

It’s shoots ok

You know how much money the richest man in town left after he passed away.......all of it.........

I may change out the stock and scope get it down to 9 pounds or less kinda like this 300 win Mag Eric built for me. This is the weight before scope on the 300 win

24 Rounds of Gunwerks 7 Saum 23 Rounds of 30-06 mixed head stand 23 Rounds of 270 mixed head stamps I will sell it all for $30 not going to separate just cleaning up stuff that somehow gets on my bench. location N Scottsdale Evening N Phoenix Days

Redding 44 mag dies needs pin for de-capping and shell holder $35 North Scottsdale in the evening North Phoenix 101 and I-17 during the day

bump

I have three 300 Win all have brakes I can’t fathom how a brake would cause you to flinch more 🤷‍♂️it works just the opposite for most shooters self included.

There was this one time at band camp... wait what Cool gun.

I have shot them both probably close to 500 rounds each and would lean towards the SIG. In my experience the trigger on the SIG is crisp with just the right amount of take up. Glock triggers are Glock triggers.

Brand new Wilton 5 1/2 jaw Tradesmen vise this one has never been used asking $280. Location North Scottsdale or North Phoenix

Great vise for your garage or your gun room.

I have seen them go for $250 to $450 just depends on condition, accessories how much someone wants to pay. There is one on EBay for $1500 it has been on there for 6 months and will probably be on there for another 6