452b264

ttt

ttt

ttt

PM SENT

What color (exactly) is the cerakote on the 7 mm? I am about to re-barrel my rifle and cant make up my mind to try and get the action color to match the SS barrel or go all black.

I have back packed into the wilderness areas (and very remote sections of NF) to hunt and fish extensively in my youth, mostly by myself as I was raised in bigfoot country and I can tell you they will never find one. (BS)

North end of Glendale, but I will be working in Mesa for the next two weeks, including this Saturday.

ttt

Savage made two different length short actions (bolt spacing) . Check the bolt spacing before you buy it. Savage Centerfire Action Length Identification. To help determine what action you have, here are the action screw center-to-center measurements. Long Action: 5.062" (all years) 3rd Gen Short: 4.400" (2006 - present) 2nd Gen. Short: 4.275" (1998 - 2005) 1st Gen. Short: 4.522" (1959 - 1988) Striker: Additional Notes: - The 1st Generation Short-Actions are today commonly referred to as "J-Series". This is incorrect as a "Series" designation simply refers to a slight design change. Rifles marked "Series J" can be either a 1st Gen. short-action or a long-action. - The 2nd. Generation Short-Actions comprise most of what you will run across. - The 3rd Generation Short-Actions are the newest production models and can be easily identified as they will have the new center-feed magazine system. The only exception is rifles originally built in .223 Remington or .204 Ruger as Savage has yet to release a center-feed magazine for these smaller diameter cartridges. **The best way to remove any doubt as to which generation of short action you have is to measure the action screw spacing.

ttt

Im on the North end of Glendale

ttt

I will have to pass, the barrel contour is to thin for me. Good Luck

TTT

TTT

Wish I would have known you were looking for a quality 22 lr, I sold a threaded 452 a couple weeks ago. Good luck on your quest.

Next in line if the deal falls though.

TTT

What has sold I listed. And yes I still have the jig for sale.

TTT

Starting load H 1000; 62.5 the MAX load; 69.5 Straight from the Berger reloading manual.

TTT

TTT

Look at Buds guns for a 700 stainless action, and find Bart lien barrel in 7mm http://bugholes.com/index.php?route=product/category&path=88_89_93&page=4

***SPF*** Thanks Goatsie