452b264

With the all copper bullets lighter is better. Try the 80 gr. TTSX.

TTT

I already have a nice 280 AI I had built but how about some pictures?

My son drew a deer tag!

TTT

If you dont have a quality pair of binoculars that is the first place I would start. A pair of 10x42 / 12x50 / 15x56. I like to have a 10x42 or 8x42 around my neck and a pair of 15x56 for glassing but some people like to carry just a pair of 12x50. The most important is good glass combined with a tripod. Then glass just as the sun is coming up, you will need to get there long before then though and then again in the evening. Dont go back to camp at midday they will get up to feed, water, turn around or move to stay out of the sun. I would also look for drainage's that have water in them away from any road. Good luck!

Still for sale.

Is the barrel and chamber chrome lined? If so thats a big plus.

I sent you a PM.

Found some. There isnt much love for the FAL these days. https://palmettostatearmory.com/surplus-fn-fal-7-62x51mm-20-round-magazine.html

21 hours ago I sent him a PM but it is still unread.

They are 4300 or 4500 cubic inches. Thats a great price on that pack.

Ive voted since I was 18 and only miss one election in my life and I dont plan to miss another one.

TTT

They are still selling for that price on ebay.

I purchased them in 1999.

We need a pro 2A ATF director in office so lets tell the president thank you for withdrawing canterbury and put someone in office that is pro 2A. https://gunowners.org/na06012020/

What is the date of manufacture? The P 07/09 are much better when carried as a de-cocker IMHO.

TTT

I have two brand new type 3 PFD, they are about 8 years old but they have been stored indoors. Chest size 30 in. to 52 inches / User weight 90 + pounds $50 for both of them.

Footage or not good luck getting it back in good condition if at all. I've been through this, with three other people I know having similar results.

I used Wright Armory once with zero problems. https://wrightarmory.com/pistol/

Toyota is moving to Mexico.

The down side to the tundra is the rear wheel bearings, they have to be pressed off/on and it takes expensive specialty tools to do it, if it isnt done correctly it causes rapid wear, The starter is also a SOB to get to. If you do a bit of searching on the internet you find it.

I would recommend not buying the cheapest coil you can find, they dont last in my experience. The motorcraft, NKG, etc. I used eccel coils on mine 2002 the last time I tuned it up and they didn't give me any trouble.