Crazymonkey

I don't know it's the only pic I got .

Looked at mine and it still said nope!! You didn't get sh*t again.

Sometimes we all feel like kids other times we just are kids . No really the azfgd regs have a youth hunter at 10 before the start of there hunt and ending at 18 so that's the age bracket .They must be able to put in for youth hunts.

^^^

Nice fat piggy 🐷. Congratulations

I'm looking for a few pieces of fired 300 prc brass to test a theory and make into brass for another of my guns . I only need a few to see if I can stretch it and bump the shoulder back up without splitting it. Thanks

I'm in gilbert power and ray. I work in Phoenix

Thanks Tucson is just a little to far to go for me .

It's great people like yourself who help with donations for the giveaway. Not only did he donate ammo for the giveaway he was kind enough to drop it at camp while we were out hunting pigs. No pigs this weekend did see some nice muleys tho . Going to try some spots closer to home during the week . Thanks Dennis ( wildwoody) for the ammo donations. I'll have pictures up when I finally get to go home after work.

The 2024 youth giveaway is quickly approaching !!! Entries will be accepted on January 1st . See the contests and giveaway section for all rules and the prize information EARLY BIRD DRAW PRIZES AND INFORMATION . Entries at youthgungiveaway@outlook.com All one word and all lower case .

Your welcome !! Enjoy shooting .

There are still hogs in 6a as my dad and I ran across one . You don't expect to hear pig when you're on a elk hunt! When I told a buddy about it he called bullcrap. Then they had archery tags and one of his friends came back to camp with a picture of a hog. He didn't know he could shoot it.

.

^^^^^

My buddies pulled 4 6a archery tags . Nothing for us yet.

Alot of the other sites are requiring 30 days and 30 posts before you can reply to want to buy/ sell or any classifieds. It seems to have cut down on scammers.

My hunting buddy had his doing the same thing . Added a adjustable gas block and changed the buffer spring rate and buffer weight

Yes sir.

.

The wife's ar15 build . She picked out the colors and kryptek pattern . Cerakote was done at Koted Arms in mesa back in 2017. I've taken this to the range a few times . It also made the trip for hogs in Texas

First time I put my can on my ar15 last year it was about what you describe after shooting . Lots of crud in everything ! Probably going to look at a low backpressure type can for the ar and really pay attention to adjusting the gas system and see if it helps . Don't forget the mags mine were black from the gasses blowing back thru the action. Bolt guns are so much cleaner.

So I just picked up the wife's gun from Michael at Desert Custom Gunsmithing and Guideing LLC . He's a fellow cwt member and has been cerakoteing the kids giveaway guns . It's definitely the wife's gun !!! It does look awesome and came out better than I'd hoped. Maybe it will get me off the hook for all the $$$ I've spent on my guns. You guys looking for cerakote or something gun related give him a call he's on the west side of town.

So after some digging into how there adjusting things . There using the tie rods to align the front end . After getting the steering wheel centered you adjust the left side toe straight then bring the right side tie rod in or out to align with the left side . All the while trying not to move the steering wheel off center and keeping the tie rods perpendicular so the front end doesn't create a bind . What a fu** Ed up way to do something simple. They could have just added a extra nut on each end of the drag link and used it as a locking jam nut . Loosen the outer jam nut then loosen the inside nut then adjust steering wheel to center then tighten inside nut then tighten the outside jam nut and it would work to lock everything tight and still be adjustable. Probably just a few dollars for the nuts but it's cheaper to just weld the link and call it good . What a bunch of half a$$ engineering on there part.

That's the part that's screwing things up . I can and have adjusted my own front ends on most cars . I'm guessing they centered the wheel and welded it after it was aligned . The only other way I can see is to adjust the tie rod ends individual with the wheel locked straight . Not the right way to do things but without cutting the welds and adjusting and then re- welding . I don't see another option . Lots of shops won't do them because of the weld fix that ram used instead of replacing a bad and unsafe design.

Someone is using my profile to contact people regarding things for sale / want to buy . It's not me I don't do any type of e- banking . I'll be contacting a administrator to fix the issue .