ctafoya

I have a few hundred rounds in the east valley

Been sitting on a gun in the safe for the last 10 years. Has a little scuff on the elevation cap but other than that in great shape. Glass is good, a little dusty though. I lost my lens pen so I'm not going to attempt to clean it. Dead hold BDC reticle. Will come with 6 screw Vortex rings, I believe they are low. $225 picked up in east Mesa.

TTT

Going a different direction on the rifle this was on. Adjustable for different lengths. $75 picked up in east Mesa.

TTT

This car has been sitting for almost two years as a backup. The price is firm. I do not need to sell this car. I have no problem keeping it as a backup. $20,000. Trailer is included. I will not sell the trailer by itself unless the RZR sells without it. New UTV Stereo battery, all new fluids. I have never thrown a belt in this car. It's still on the factory belt. It comes with a Polaris OEM spare. 3061 miles on 202 hours. This has been used for desert trails and rock crawling. Dunes have been at Sand Hollow going from the rock obstacles to the desert trails. It has some bumps and bruises and SC1 shines it up nice. It has never been abused and always maintained well before it needed service. Motor is stock, no tune. Below is a list of what I remember of work done to it. 2019 RZR XP EPS 1000 Turbo. Plague industries cage and windshield. Super ATV +2 tubular A arms. NO SWABAR. If you, go to the dunes you will need to find one. Super ATV Swing arms. Super ATV boxed high clearance radius rods. TMW doors and front door bags. Super ATV 6000# winch. Sampson suspension seats. Driver has the drop/recline kit. Polaris OEM rock sliders. Super ATV full skid plate. Nacho A pillar lights. Amber, smoke, and clear lenses. Dome lights. Chace lights. 5150 LED whips. ARB on board compressor. Polaris OEM gear box behind passenger seat. Milwaukee Packout base behind driver seat. Baja designs ONX6 light bar. Switch pros with extra spots. Valor wheels with 32" tires and matching spare. Rolpax 1.5-gallon tank. Yeti cooler tie downs. Re valved shocks with Z-Bros springs. MB Quart stereo with 10" sub and gain control. Lockable glove box. XTC Steet legal kit with fangs and rear middle light. Sizmik side mirrors and rear vier mirror. Ram Mounts phone holder. TRAILER: 2020 Dimond C. Re planked a few months ago with treated lumber. Fold down rear gate. RZR fits perfect on it with a little room to spare. I'll post actual dimensions soon. Clean title on both. Trades that will be entertained.: OBS chevy and pre 73 Ford 1/2-ton two-wheel drive pickups. 4X4's maybe depending on what the ol lady wants.

Weekend bump

Weekend bump

Looking for dove/quail guns and waterfowl guns in semiauto. Glock 20MOS 10mm, maybe another full size 10MM. Nice 300WM aluminum or bass boat. Fast antelope gun, who knows. ITM Arms MK99 AK 47. Got this from a buddy 20 years ago. Shot it a little bit then it sat in safe. Magpul furniture, Sig Romeo, Surefire suppressor adaptor, 6 steel mags, two Magpul mags, about 1900 rounds of ammo. Must pick up in east Mesa, be an AZ resident and not a criminal. $1200 CAN SPLIT THINGS UP IF RIFLE SELLS FIRST HK SL-8 with Tommy built Tactical PSG-8 conversion. The conversion switches the lower to a grip, adjustable stock, and the use of AR fire controls. These are no longer available. Tommy Built Tactical has shut down. It has a Giessel SSA trigger in it. It only takes 10 round magazines unless the magwell and bolt are replaced. It also has a Tommy Built Tactical rail that is higher than factory. This has never been fired. It will come with 2 mags all the factory parts, manuals, case, etc. The rail on the bottom of the for end is not the correct one. There is nowhere for the rear bolt. By the time I realized this the return policy on HK parts had expired. This is ONLY .223, no 5.56. $2000 Remington 870 Express Magnum. Blackhawk furniture. I bought this about 25 years ago. Its been a fun and reliable gun, but I want to upgrade to a semi auto. Probably needs to be broke down and cleaned, but it still functions flawless. $400. Must be picked up at my house in the east valley, FTF, be of age and not a D bag criminal. Cash only, no apps. Traded, partial trades accepted depending on what it is.

Weekend bump

Going another direction, too low for me. 30MM zero MOA. Haven't pulled it from the rifle yet to show how low it is. I couldn't figure out the little level that came with it. Never out of the house. $400 picked up in the east valley.

Weekend bump

2 1000 bags M855 projectiles. I'm having a hard time pricing these. I don't remember what I paid. The only ones I've seen were on gun broker around $.30 per bullet. That would be $300 per bag. Ill go $150 per bag 10 20 round boxes underwood 220GR hard cast $15 per box. 3 20 round boxes 147 grain 9MM defense rounds. $20 per box 1 box 45-70 405 grain. $25 1 20 round box HSM bear load 220 $15 5 50 round boxes federal 147GN 9mm $15 each 50 new Hornady 30-06 $40 with box Must be picked up in the east valley.

12.7" Aero Atlas R-One M-LOK Magpul FDE. $150 Aero AR pistol buffer kit. $35. Noveske N4 GEN 4 M-Lock 15" NSR 15 Bline $250 Magpul RVG. $15 Noveske black nitride m16 cut bolt carrier. New. $200 Noveske Flaming Pig 30 cal. Was installed, but never fired. $75 Leupold sun shade. This is for the older models. $25 Noveske PEQ mount. $75 1 1911 mag new $10. Leupold Alumuna standard eye piece cover $40 Box of misc knives. Some junk, some need repair, some OK. Will throw in a K Bar skinner. $35 Must pickup in the east valley no shipping.

Weekend bump. Make an offer

Have you dealt with buyers on this site before?🤣

Instead of buying new stuff I thought I'd freshen up a few I already have. First off, I'm looking to get my Savage 116 300wsm fitted with a Proof barrel. It doesn't appear they make pre fits so I guess I'll need a blank? Not sure how it goes, I've never re barreled a bolt gun. I'm looking to get this done ASAP as I need to re do load development for a WY hunt this fall. Any help would be appreciated on how to go about this. Thanks.

Well I think this is the one I'm gonna go with. I'm going to try and Berger 175 VLD's or SMK's. Found out something fun, I need an accustock recoil lug for a Greyboe chassis. The earlier 4.4 actions use a wide one.

Sold

SPF

I decided to buy my own tools to do the swap. I'm ordering a barrel that'll take a bit of time, but I like to build my own stuff. Thank you to all that replied.

up

up

up