muledeerarea33?
-
Content Count
8,340 -
Joined
-
Last visited
-
Days Won
35
Posts posted by muledeerarea33?
-
-
your probally going to want to get an aluminum block engine with alu. heads. thats what marine motors are usually made of.
-
if its still there the talwiwi lodge(spelling?) is a real nice place
-
First off some of the mini 30s are very inaccurate weapons as are the mini14s but there are ways to help it. as far as the cleaning try your stainless brush first and if it is still dirty break the gun down to just the barrel and action. try performing a procedure called reverse plating. bassicly you plug the chamber end of the barrel with rubber find a rod that is about an inch longer than the barrel and smaller in diameter than the caliber. the rod goes in the barrel and touches the rubber stop at the other end By no means can the rod touch the barrel. fill the barrel with amonia (I use a concentrated winshield washer solvent that I get from work. works great.) then take a 6v battery with some jumper wires. connectone to the rod and one to the gun . the solution should start bubbling or foaming. keep an eye on it as you will have to refill occasionally. let it run for about an hour then dump it out and clean normally. if its still dirty do it again a few times. I have stripped some pretty nasty stuff out of old millitary rifles that normal cleaning couldnt get. you can find all this info online in various places. as for the action sticking closed I know on mine that the gas tube gets really dirty on the ribs and a little steel wool takes care of that and frees it up nicely. If the gun is still inaccurate as was my mini14. remove the front site cut 1inch off the barrel recrown and reinstall the site. if your not comfortable doing this take it to a gunsmith. I know it took my mini from about 4-6 inch groups at 100yards to just under 2inches. wich is pretty good for a mini. the only other option i know of is spend the 800 bucks on a accuracy kit. hope this helps you out and doenst just look like a ramble.
-
this was year 8 for me and no elk. but thats how it goes I guess.
-
If thats the dwelling off the road going to rattle snake gap I have been there many times cool place. there is an old mine shaft about a mile or so over the mountain that is worth checking out too.
-
price redued $4000 must sell this thing its taking up space. oh and no beer trades TERRY
-
forgot this. i am in tucson and can drive to surrounding areas if needed
-
1972 short bed 2 wheel drive ford pickup 99000 original miles on 390 V8. this is an original owner truck. has oil leak from valve cover gaskets and distributor o-ring (small repairs) needs seat and carpet work material is rotting. paint is two toned green and light green and in decent shape. no dents or rust (that includes the bottom of the bed) $4500 o.b.o. or trade for partial cash and????
-
thanks for the info casey. got a friend who wants to use a .223 this year. I always thought the min was .243 6mm guess I was wrong
-
just wondering what the min legal caliber for deer hunting is? how about the max?
-
I think thats something that they should not announce. they should just kill them and move on. announcing something like that is going to upset alot of people. from enviro's who dont want them killed to hunters who would of paid to go kill them.
-
I have that issue with my mini-14 it wont shoot NATO 5.56 a guy told me to use a little emery cloth wrapped on a pencil in the chamber and take about a thousandths of an inch off then polish. if your not comfortable doing this take it to a gun smith as 300 wsm said.
-
I shot mine earlier this year with a 180 gr. 30-06 entry wound pin hole exit wound about 3 inches ruined no meat. the shot was about 50 yards away.
-
That looks like a pretty long shot. How far was it?
-
I sent you a pm
-
its all about making a buck
-
there is also one out by the fair grounds. it is limited to 200 yards. I reccomend the three points range it is really nice
-
Those are the videos that give hunters a bad name. That just maked me sick to my stomach that those people actually shot a lion that had no where else to go but towards them. The "nonhunters" are watching that crap and its just proving them right (in their minds) that all hunting is bad. It just pisses me off.
-
Terry your a liar all you drink is beer
-
thanks for all the input and youngbuck I will try that thanks again
Daniel
-
we were down south of tucson and got totally skunked. we saw no quail and about 500 dove. well hopefully sunday is better
-
I have been looking on the wssmzone and found some good stuff. I have my reloading supplies and my lyman book doesnt have the wssm. I guess my question was too broad. what I was wondering is if anyone has reloaded any and what they were using. thanks for your replies.
OH and terry the 223wssm kicks the butt of the 25-06
-
I am wanting to reload rounds for my 223 wssm I was wondering if anyone has loaded this round before and if so what they had good results with. I have the dies but dont really know what else I am going to need.
any help would be greatly appreciated
thanks
Daniel
-
THERE HAS BEEN A FEW OTHER PEOPLE ON THE FORUM THAT HAVE GOT BURNED FROM THAT PLACE IF i REMEMBER RIGHT
45 cal bullets for sale
in Classified Ads
Posted · Report reply
I have roughly 400 laser cast silver alloy .452 and 100 moly coated .452 bullets that I cant seem to get to shoot well out of any of my 45's. these I beleive will work in a colt 45 as well as acp. $25 for the lot or trade for something cheap I guess? I just want to get rid of them. tucson only please.
thanks
Daniel