duckhunter175 Report post Posted November 13, 2019 HAVE Manners MCS-T, Elite fill, Rem 700 LA, RH, Rem Sendero Contour (can be opened for a Proof), M5 DBM inlet, 1" pad, 9/16" pillars, 2 front/1 rear stud, Swamp Camo, NEVER fired, NEVER bedded WANT MCS-T, same or similar set up, color doesn't matter, NEED BDL INLET $625 shipped Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 14, 2019 TTT Share this post Link to post Share on other sites
lancetkenyon Report post Posted November 14, 2019 Don't think the .257 Wby round will fit in a mag? Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 14, 2019 1 hour ago, lancetkenyon said: Don't think the .257 Wby round will fit in a mag? Oh it'll fit! I got two of the same stock for doing 2 identical builds.... but on the 338 EDGE I'm going to BDL metal and Wyatts internal box so I can seat the bullets out longer than in a DBM set up. Lot harder to go from M5 back to BDL😖 Share this post Link to post Share on other sites
lancetkenyon Report post Posted November 14, 2019 Ahh. Got it. .338 Edge=Shoulder Mounted Howitzer. 2 Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 14, 2019 2 hours ago, lancetkenyon said: Ahh. Got it. .338 Edge=Shoulder Mounted Howitzer. Plan is to have the 'battery' trimmed down to 3 bolt action centerfires-- the .257 blackjack 'bee', the Edge and then my old trusty 783 6.5cm that gets laughs for a $350 gun with a $2k scope... until it shoots a little bitty ragged hole next to the range neighbors shotgun blast. The .257 and .338 will have nearly the exact same ergonomics (MCS-T, Proof, TT Special Flat, 20 moa seekins) and I'll move my scope in between the 3 rifles as needed. 2 Share this post Link to post Share on other sites
lancetkenyon Report post Posted November 14, 2019 Or you could get two more March...... 3 Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 15, 2019 4 hours ago, lancetkenyon said: Or you could get two more March...... An FFP/MOA/ILL March is on the hit list, seems like theyre hens teeth right now... but gotta finish these rifles first-- when the need arises I think it would be prime for an ultra light build- Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 15, 2019 Let cut to the chase- I think you need this stock, lol! Share this post Link to post Share on other sites
lancetkenyon Report post Posted November 15, 2019 Have you looked into a CIP length .338LM magazine? Should still fit in the M5 inlet. 3.600" standard 3.680" CIP Or are you looking at the Wyatt's 3.990", 3.825", or 3.710"?? Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 15, 2019 1 hour ago, lancetkenyon said: Have you looked into a CIP length .338LM magazine? Should still fit in the M5 inlet. 3.600" standard 3.680" CIP Or are you looking at the Wyatt's 3.990", 3.825", or 3.710"?? Looking at the 3.990"-- most of the load data I'm seeing has COAL around 3.9~ with 285 ELDM which is what I'm planning to run mostly and then maybe 260gr Hammers. 1 Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 17, 2019 TTT— would consider selling Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 19, 2019 $625 Share this post Link to post Share on other sites
duckhunter175 Report post Posted November 27, 2019 TRADED Share this post Link to post Share on other sites
