Win264

I have 2 Stocky stocks both are Medalist ultra lite, one for SA REM 700,and LA WIN Mdl 70 Mag and im buying another one for a rifle I'm building, not what you are looking at but another alternative. I like them, no complaints functionally and very affordable.

Yup, grey that s what I'm beginning to think, I just wanted to find out and possibly get it out of the way. I appreciate everyone's help! Thank You!

I did see the form you mention on AZGF website and wondered if that was possible , I'll look into it, Thank You!!

I'm looking to get the non permit archery tag for deer in January 2016, I've checked the Regs and don't see where I can purchase it before January 1 online, do I need to go to a G&F Dept, or retailer? Your help with would be appreciated. Thanks!

I'm not going to to apply this year and probably not next year, if you go..... DIY! pm if you are thinking about it

I emailed ST and they expect to start shipping by the end of the month,

Any buddy have any experience with Deep 6 fixed broad heads? I'm looking to get the Slick Trick but they aren't out yet.... that's what I've been told by the suppliers. Whatever info you have will be appreciated! Thanks!

Thanks for the info, I have some ST Deep 6 magnums coming this week, I'll try them with the Blazers I have on the arrows now and if that doesn't work I'll try the feathers.PAC 8541 PM sent

I'm looking for advise on what fletching you are using with micro diameter arrows with fixed broad heads. I have the Easton Deep 6 injexion micro diameter FMJ arrows. I'm using blazers for my field points. On my GT'S I use 4" feathers with right helical for my fixed blade now but Im thinking this might be more than I need for the Eastons. Let me know what works for you.

Found an excellent linear DIY press on AT as you suggested by 92 safari going to build one....thanks again for the info

Thanks for the info, the bow press is an excellent tool, I will be getting one for when I'm out hunting and shooting emergencies etc. I'm looking for something for the shop. I have seen the ones by last chance archery on AT ...... Is there a particular model you would recommend?

I'm thinking about getting a bow press, I have a Mathews Helim, I'm not wanting break the bank and I'd like something doesn't take up a lot of space all the time. any suggestions on what I should get?

FYI for any one wanting to change out pins on Spot Hogg, I purchased the bullet proof pins installed them myself, unscrew the pin, pull the pin and fiber out of plastic sheath, install new fiber in plastic sheath and screw pin on, be careful of the wire when removing pin.

I have the Spot Hogg SDP sight with wrap, I want to change 2 of my sight pins, the 70 yd and 80 yd pins from .019 to .010, I can buy the pins and fiber. Has any one done this or have any knowledge of this. I can send it back to the manufacture for the change out but I'm wondering if I can do this myself.

PM sent