Schmitty

I'll take it. PM me your contact info.

73-77.5 grains of H1k for the 175 and 180 eld per hornady.

$1100 tops for a bare bones 28" field model in well used condition with invector chokes.

I'll take the "Area 419 6.5 Hellfire Muzzle Brake $100" if you can ship it to Prescott.

I also have this Forster neck sizing die kit if you are interested.

I'd hang onto the scale to verify your electronic scale. I use a charge master but use a quality balance beam (10-10) to check every charge on my precision loads. The 10-10 is much more precise/repeatable than the charge master which tends to drift up and down. I'd love to spring for a high dollar setup like a prometheus, but will have to settle for now.

I have 1x fired Lapua brass cleaned, annealed, chamfered, resized and primed with Fed 210Ms. $1.35 per case up to 225 pieces.

Contact info sent via PM. 👍

Any interest in trading for a brick of Fed 215M's?

http://sierrabighorn.blogspot.com/2017/11/migrating-mule-deer-deaths-in-high.html?m=1

I'll take it. PM sent

I'll take all of it. PM inbound

SPF I

I'll take them. I'm in Prescott so we can meet up anytime. Pm me your contact info and I'll be in touch.

I have a stainless .300 Win mag barrel that will be available as soon as my barrel vise arrives next week.

I'll take it

Thinning the herd to make way for a couple of new projects. 1. SOLD PENDING Savage Model 12 .223 $650 Varmint model with accu-trigger, tactical bolt knob, 20 MOA Picatinny rail, and a 26" 1-9 twist factory varmint contoured barrel in a Bell & Carlson Varmint/Tactical scope with the full aluminum bedding block. Less than 200 rounds down the barrel. Sub-MOA with everything I've fed it including inexpensive AR fodder. (Scope not included, but available for purchase) SOLD PENDING!!!!!!!!!!. Remington 700 .243 $800 Stainless short action with 20" factory sporter barrel, factory BDL bottom metal, professionally bedded into a B&C Alaskan shorter stock with a Timney trigger set @ 2 lbs. Unknown round count as I bought it from a friend in CO who used it as a youth rifle for his daughter for a couple of deer hunts. I've only taken it out once and the 2 factory loads both hovered around 1 MOA @ 100 yards. I'll knock $75 off the price to swap the Timney out for the original factory trigger. SCOPE NOT INCLUDED BUT AVAILABLE FOR PURCHASE. SOLD!!!!!!!!! 3. Remington 700 6.5x47 Lapua $1550 Stainless Blueprinted Remington 700 S/A with 20 MOA rail, pinned tactical recoil lug professionally pillar/glass bedded into a McMillan A3 stock with M5 DBM bottom metal (from McMillan) and includes 1 AICS style 5 rd magazine. The barrel is a factory stainless fluted 26" Sendero barrel that was originally chambered in .22-250. The barrel was rebored, cut rifled and hand lapped then chambered to 6.5x47 Lapua (my favorite caliber) by Classic Barrel and Gun works. Includes a Timney Elite "Hit" Trigger set @ 8 oz. I finally had a chance to take it to the range a couple of weeks ago and shot a couple of different loads that shoot well in my two other 6.5x47 rifles and it looks like this one will be a hammer. 28 rounds down the barrel after the rebore/ new chamber. SCOPE NOT INCLUDED 4. SOLD

Prescott, but will be in Phx on Saturday.

Replied back. Thanks!

Fixed. Thank you

Stud Ram. Congrats!

I'll trade a Like new T-3x (still has the stickers on the stock30-06 and $50) or $600.

👍👍👍

Phil, If you are going to see your brother George over the holiday, send a couple of cases north with him and I can pick them up at his place in PV and I'll throw a few gallons of fuel in his truck for the inconvenience. Happy Thanksgiving!

How much more stable is an Arca mount vs "the claw" mounted in a stable head like the 701hdv? Can you mount your optics to the Arca adapter when out hunting? Thanks!