forepaw
-
Content Count
588 -
Joined
-
Last visited
-
Days Won
1
Posts posted by forepaw
-
-
The longer it goes without updating, the more chance they will sell a few more point guards.
-
PM sent.
-
-
Pretty nice. What scope is that.
-
On 1/28/2025 at 8:46 PM, northAZarcher said:What hearing protection do you all use for quail hunting, if any? Went out a few times this year without it but really want to invest in something that will protect my ears but still allow me to hear birds flush and move around in brush. Looking into the electronic style but with great battery life.
Lots of good suggestions. One that has not been mentioned are the 3M Peltor EEP-100's. Affordable, rechargeable. Have had best luck with Skull Screw ear tips - an extra item but many have found these better than the included ear tips.
-
1
-
-
1 hour ago, Tyler52710 said:Went out hunting today with a few others for archery javelina. Managed to get one, the person we usually give the carcass and meat to is no longer wanting them. I was just curious if anyone knows of any donation facilities around Phoenix area or if anyone wants to meet up who wants the meat, just let me know
Been awhile, but the last javi I got (sow) was good. I hung it up, rinsed with water/vinegar mix and let it chill overnight. Then I boned it, and ground coarse for chili using about 10% pork fat. Added some seasoning, and into the crock pot it went. Actually, made several crock pots, and froze some. You could tell it was game, but still good.
If you and you buds are dead set against eating them, I suggest you consider snooping around south of Patagonia. I understand there are feral hogs there, and those are not considered wildlife, so no tag needed. They might be pretty good eating, and they dam sure need to be shot. Just an idea.
-
13 hours ago, RodinAZ said:Spf
The buyer got a great deal. These are underrated bows in my opinion. Even though they are entry level, if you add good sights and rest, and have someone tune who knows what they're doing, they really shoot. The draw cycle is decent, but wall tends to be a little mushy. For a backup or kids bow, this is a very decent piece of gear. Even if you add new string and cables and a heavier stabilizer, you are still under $500.
-
38 minutes ago, L Cazador said:You're one of many that isn't affected by shoulder bump or setback. And with the results that you're getting great that it works for you. Just to confirm Lee neck sizing die does not bump or setback shoulder. It sizes neck portion of case so it will accept and hold a bullet when it's seated. The remainder of the case stays in it's dimensions as extracted from the chamber it was fired in. There is a small amount of brass spring back that does take place usually between .001-.002". This stretching as it's called will eventually lead to the brass being difficult to chamber. This where a body die will restore all dimensions back to SAMMI specs. The body die not only sets the shoulder back but also sizes the shoulder width, the neck diameter, and the body of the case from the .200'' line to the body shoulder junction. Body sizing each and every time a round is reloaded is an excess of work on the case and can result in reduced case life. This is where a bushing style full length die can be a compromise between the two. You can set the shoulder back just enough for a smooth chamber and then size the neck diameter to perfect bullet tension for your load. Like you say above you and your shooting discipline may not require all this precision but there will be other disciplines that will.
That is great info. I will print that and put it with my die sets as a reminder. I didn't think there was that much brass working going on with the body die. I have come pretty close to getting a couple sets of bushing-style dies, as they really look like the way to go. Once you have your basic dimensions, just order the bushing size you need. If you rebarrel, just order another bushing.
The other thing that might be mentioned for the other readers, is the subject of neck turning. This step is usually for precise match chambers, i.e. benchrest shooters, and if you neck turn brass with an ordinary factory chamber, even a SAAMI chamber, you might end up with sloppy neck fit, which will likely not help groups.
Thanks again.
-
Thanks @10Turkeys for the UR vid. Good info and good explanation. And also good to see the equipment available if you want to tune your handloads to perfection (and can afford it). Possibly not needed however, for those of us with less demanding handloading needs.
In my case, and with respect to the two rifles with the highest round count, I don't pay any attention to shoulder bump. I neck size using Lee dies, then I body size using a Redding body die. Chambering is reliable and easy. Case life is long, and accuracy good. In one caliber, using Lapua brass, I am on the 21st firing, with easy chambering and no sign of incipient case head separation. Possibly, the Lee neck sizing die or the Redding die have built-in shoulder setback in the ideal dimension, but I have not been able to detect it. Possibly someone with more knowledge can confirm this.
I normally anneal (using the candle method) after every 5 firings, and probably should be more attentive to doing that, but burned fingers gets a little tedious.
-
1
-
-
14 hours ago, Lucafu1 said:Thanks for the info. I need to research this, I am interested.
This match accommodates a variety of skill and equipment levels. It is family friendly. If you want to shoot a Mini-14, or Thompson Contender, that would be ok. If you prefer a heavy-barrel bolt gun, with rangefinder, Kestrel, and ballistic software, that is fine too. Chronographs and spotting scopes welcome. Ditto tripods, shooting sticks, you name it.
-
1
-
-
17 minutes ago, MULEPACKHUNTER said:Sounds like a fun time thanks for the info.
The restrictions do get frustrating, a 125grn limit you just lost every 6.5 mm guy out there. Fix the target system and let the guys shoot
Not at all. I shoot 100 gr. 6.5 Nosler BT handloads at 2980 fps. Seems to work. But I think there have been some 6.5 shooters using 140 gr. Nobody seemed to care.
-
10 hours ago, 10Turkeys said:Is the 125 grain bullet weight restriction correct?
Well . . . it is loosely correct. It was the old requirement, when the match was run by a different MD. I am not sure the new guys pay much attention to it. With less than full power handloads, heavier bullets would probably not damage the steel targets. The problem with heavy bullets is they impact with so much energy that sometimes both targets fall, since they are in sets of two. Then you have to stop shooting (I guess you could claim an alibi for lost time) while both targets are reset, then shoot your remaining target. Seems to happen every match to one of us. Calibers are mostly .22 CF, though there is an occasional .308s, 6.5x55, etc.
-
For those who are interested in precision rifle shooting, the varmint silhouette match at the Sierra Vista Rod & Gun range has been reactivated, and is scheduled every 4th Sunday on range #6. (The February match will be the 3rd Sunday, since The Tactical Games will be held the 22nd and 23rd) The fee is $10 and the targets consist of two rows of 10 each from 200 to 420 yards. The targets are resettable via long cables, and this is handled by the match director and assistant.
There is a covered shooting area, concrete benches, restrooms, and plenty of parking. Safety briefing and random drawing for firing position starts at about 0830. You can shoot from bench or prone, bipod or rest. If you need someone to spot and score for you, one of the other shooters will give you a hand.
This match is informal, and new shooters are welcome. You can pretty much have as many sighters as you need, though the course of fire for record is timed at 10 minutes (10 targets), with a 2 minute prep. time. The only restrictions are no magnum calibers and no bullet weights over 125 gr. Generally there is time before and after the match to check zero, etc. When the match is over, you can do more shooting on the public range if you would like to do so.
The SVR&GC range is located on the south side of Hwy. 90 between mileposts 334 and 335. This is not long range shooting, but the targets are small and the wind can be a challenge. This match does not have any set up or take down to speak of, and is a good time to really check performance on deer and varmint caliber rifles.
Perfect scores are few and far between, but you might be surprised at how many you knock down. Come on out and give it a go!
-
4
-
-
PM sent.
-
Dang. They will have to take hunter safety again.
-
Crossbow user. Still, 2 MOA pretty good.
-
Next time think about getting some lead in the air for those dogs. Very dangerous when grouped like that.
-
1
-
-
Anything still available?
-
You live in Sierra Vista? Where do you shoot? Been looking for someone to carpool to the Douglas range.
-
1 hour ago, PRDATR said:I've often thought to myself that every trip is a learning experience. My first solo deer hunt was a memorable one. I had a 68Chevy truck with a six cylinder and two wheel drive. I drove in on Four Peaks rods and took a road back to an old deserted ranch one day after work. Slept in the back of the truck and heard some hewhaw's and thought, so that's why they call them mule deer. Got up early, grabbed my 44 Contender and a Featherweight 06 I had bought earlier on clearance for $269 at Walkin Auto in Tempe.
So, off I went down the wash to the upper end of the lake. About two hundred yards farther I rounded a bend and there were two spikes sparing, maybe 30 yards. I pulled up the rifle and shot one. They both took off over the burm in the same direction. I went over and found blood and started to follow it. I trailed it for a short distance and it took me back to the opposite side of the wash. Then I followed it down the wash and came across the buck lying dead under a paloverde tree.
I had some rope and tied it around the buck and over a branch. I pull the buck up in the tree as far as I could by lifting it up with one arm and pulling the rope with the other. I had it gutted a short time later and threw him up over on my shoulders and carried it back up the wash. I was glad when my truck came into view and when I got to it I reached up and dropped the tailgate and laid the buck down. It took me about an hour to get home and the wife was a work. I put some plastic down on the kitchen table and did my best butchering my first buck and was done by about 11. That was probably 40+ years ago.
Walk-in Auto was a great place to buy guns and ammo. You probably bought the same featherweight '06 I was looking at.
-
Used Diamond Infinite Edge Pro series are available both LH and RH for around $200 retail. Often they come outfitted with accessories as the seller grows into a newer bow. They are decent shooting bows, and adjustable to 70#. Something in this range would allow you to get started while saving your $$ for a more expensive setup once you have learned form, muscle memory and concentration. Get some instruction, so you don't have to break bad habits like the rest of us!
-
1
-
-
11 hours ago, 654321 said:Cheaper to contract out, than pay a full time employee 🤷🏼
True. Almost every agency or business of any size has call centers nowadays. At least this one appears to be in the U.S.
-
9 hours ago, ajohunter said:I’ll be taking this up the chain if the manager doesn’t allow it. ABQ to regional director then DC if that doesn’t pan out. Already talking to attorney as well.
You may want to get one or more of the critter groups involved (ADBSS) as well as the AZGFD access coordinator for that region (is it IV?). Also a letter or call to the AZ congressional delegation might not hurt.
-
2 hours ago, knothead said:A lot of great careers in the skills areas and there is HUGE demand for people willing to work and who have the appropriate skills. I recommend he take an aptitude test and find out what he is mostly suited for or at least point him in right direction. There are lots of them out there on internet. My school district subscribes to one, but I also use O*net online. www.onetonline.org Too many people start out in careers that they end up hating because it isn't a good fit for them.
Good suggestion right there. He could also go talk to a recruiter for one of the branches (Navy probably best for electrician category) and sit down and take the ASVAB. The recruiter will be pitching enlistment, but in reality he can walk away any time. The scores he comes up with will be a pretty good aptitude indicator. Not sure how they do it now, but it used to be broken down by math, general knowledge, language, shop practices, sonar (hearing), electrical, mechanical, science, etc.
Results Posted?
in The Campfire
Posted · Report reply
Good point. Opportunity closed with the draw.