Antler assassin Report post Posted May 8, 2023 We are looking for pipe for corner posts on a pasture maybe used oil field pipe. We are not picky. Also looking for t post and staves. Please let me know what you have. Thanks in advance Share this post Link to post Share on other sites
Boarman03 Report post Posted May 8, 2023 13 minutes ago, Antler assassin said: We are looking for pipe for corner posts on a pasture maybe used oil field pipe. We are not picky. Also looking for t post and staves. Please let me know what you have. Thanks in advance If you are welding to the pipe, oilfield pipe can be a challenge as it tends to be saturated with the oil which can interfere with a strong weld. On the flip side, it seems to hold up very well to the elements, even when buried. Share this post Link to post Share on other sites
HorseHunter Report post Posted May 8, 2023 I've got 5- 33' sticks of lined 2" Oil field Pipe Small for corners but perfect if you are doing braced corners. $300 for the lot and I can cut in half if you need me to. North PHX 1 Share this post Link to post Share on other sites
andyyy Report post Posted May 8, 2023 1 hour ago, Boarman03 said: If you are welding to the pipe, oilfield pipe can be a challenge as it tends to be saturated with the oil which can interfere with a strong weld. On the flip side, it seems to hold up very well to the elements, even when buried. Just use 6011/6010, cuts right through. 1 Share this post Link to post Share on other sites
Antler assassin Report post Posted May 9, 2023 On 5/8/2023 at 9:59 AM, HorseHunter said: I've got 5- 33' sticks of lined 2" Oil field Pipe Small for corners but perfect if you are doing braced corners. $300 for the lot and I can cut in half if you need me to. North PHX Do you know the wall thickness by chance? Share this post Link to post Share on other sites
HorseHunter Report post Posted May 9, 2023 16 minutes ago, Antler assassin said: Do you know the wall thickness by chance? 3/16" and OD is 2-3/32" I just checked with a digital caliper. I have other pieces I had built a 3 rail gate (that was too heavy for my corral) and a large screen shade frame made from the same material, I could cut and sell by the foot as well. Share this post Link to post Share on other sites
Antler assassin Report post Posted May 10, 2023 20 hours ago, HorseHunter said: 3/16" and OD is 2-3/32" I just checked with a digital caliper. I have other pieces I had built a 3 rail gate (that was too heavy for my corral) and a large screen shade frame made from the same material, I could cut and sell by the foot as well. Pm sent Share this post Link to post Share on other sites
HorseHunter Report post Posted May 10, 2023 7 hours ago, Antler assassin said: Pm sent answered Share this post Link to post Share on other sites
Antler assassin Report post Posted May 14, 2023 Still looking for t post and staves. Thank you Share this post Link to post Share on other sites
