Need a 35amp RV circuit wired up

[dutchmanazA1]

10 minutes ago, Big Tub said:

SOLD IT?   

You got to tell us the story ... enquiring minds want to know.  

🤣After spending more time under it than I wanted trying to fix a stabilizer jack motor I was tempted. Also realized I looked remarkably like one of those fat bugs that gets stuck on his back with all appendages straight up in the air trying to right itself. My back is letting me know about it today. 

Decided from the feedback here and from the electrician who'll do the work to install a 50 amp circuit. 

[Big Tub]

3 minutes ago, dutchmanazA1 said:

🤣After spending more time under it than I wanted trying to fix a stabilizer jack motor I was tempted. Also realized I looked remarkably like one of those fat bugs that gets stuck on his back with all appendages straight up in the air trying to right itself. My back is letting me know about it today. 

Decided from the feedback here and from the electrician who'll do the work to install a 50 amp circuit. 

The 50 amp is good for future versatility.  However, have him hook it up as a 30 amp so you have the protection of the lower amperage breaker.  Or better yet, have him install 1 of each and a 110V- 15A GFIC for hooking up heat tape on your water inlet.  Scope creep has always been a problem for me.    

[jdown]

I did this with mine if it helps 

Ran two sets of wire from my box to outlet.  The 30 amp outlet is different than a 50 amp outlet. I ran a set of 10 ga and a set of 6.  10 for the 30 and 6 if I ever change out to a 50 amp. You don’t want to run 10 to a 50 or 6 to a 30 if that makes sense. 

[Kaffer62]

You may want to delete the picture with your address on it. 

[dutchmanazA1]

14 minutes ago, Kaffer62 said:

You may want to delete the picture with your address on it. 

Thanks for that. Appreciate it