rcdinaz Report post Posted December 28, 2019 Looking for the best way to do this on a standard rifle stock, not a chassis stock. I have a triclawps but this would be even simpler and takes up no space. No additions to the tripod or other adapters to fiddle with. https://www.bhphotovideo.com/c/product/1344815-REG/really_right_stuff_bmlok_60_m_lok_adapter_plate_60mm.html https://mdttac.com/us_en/m-lok-arca-rail.html Share this post Link to post Share on other sites
Delw Report post Posted December 28, 2019 could you take a harris bipod mount, and fasten that someway to a tripod mount? the harris mount parts fits nicely up against a standard shock flat varmit style and or rounded hunting style. I would think maybe take the plat off drill a hole or 2 and it would work. Maybe even put a stuff in it for the tripod. I have a bunch but there all at home and I'm at work I may have one here Ill look later. What does the tripod mount look like? bright side then you would be able to put the plate back on a harris if you elected to do so. Share this post Link to post Share on other sites
azhuntnut Report post Posted December 28, 2019 https://aristotle-engineering.com/products/rifle-railz-gen-2-tripod-mount/ 1 Share this post Link to post Share on other sites
Delw Report post Posted December 29, 2019 Thats pretty cool Share this post Link to post Share on other sites
rcdinaz Report post Posted December 29, 2019 I have looked at the Aristotle but the best option seems to be mounting an Arca Swiss plate just in front of the magazine. Should allow the rifle to be pretty balanced and the best part is it would fit all of my tripods since I converted them all to the same style tripod head. The new plates are faster and easier than anything else, probably why the new Outdoorsman's use Arca now as well. could still use the Harris bipod in its current forma as well. I just can't find much info on doing the install and was hoping someone already had this type of setup. Share this post Link to post Share on other sites
