Cambow

Thanks… I’ll give this one some thought.

What are the scope specs and what would the price be to include it?

I would if it was a featherweight take-down

I wish I had never sold mine!

Thanks!

Very nice set-up... bump for ya!

What is the barrel length on this rig?

Ditto... love mine!

I did find a gunsmith in Safford that is willing to do this for me.

I know this topic is getting beat to death lately... but I wanted to post my thoughts and get some opinions. I think I make sense, but there are way more knowledgeable shooters on this forum than me. I think when you compare the two rifles in an off-the-shelf purchase situation, the 7 PRC definitely has a slight advantage in that it's potential has already been maxed out in terms of seating depth for longer, higher BC bullets. The factory set-up in a 7mm Rem Mag has some limitations and you do have to seat bullets way deeper and into the powder capacity area, along this the slower twist rate compared to the PRC. But here are my thoughts... In a custom build rifle where you can choose the barrel, the twist rate and the throat length in the chamber... I feel like the 7mm Rem Mag has the advantage. I was getting really close to starting a custom 7PRC build and the more I researched the more I felt that in a custom rifle where you can maximize the COAL and extend the seating depth, I just don't feel like the PRC has any advantage at all. Am I crazy? With a 180gr Berger VLD, I get 2945 FPS out of my custom 284 Winchester and a 26" barrel. With my custom 7Mag, I am pushing to 3000 and I can't even seat as far out as I wish I could. I would like to push out to COAL of 3.600" and I am only able to get 3.400 in my rifle. I think if you build a rifle that allows for the max length... you would actually best the 7PRC. (Both of my loads are using 7828SSC powder). I would love to hear some thoughts on this.

By seating the bullets out a bit, I am getting better velocities from 7RM handholds than most are getting with the 7PRC.

Is the brass all the same brand or mixed?

What are your major cross streets?

Thanks... I am interested in the Sierras and Remingtons if I can find time to head your way next week and you still have them.

What are your major cross streets?

Thanks!

What is the barrel length on this rifle?

Ttt

Bought this on here and have never had the chance to shoot it. Previous owner said had been on one hunt. It is in great condition and comes with the 3-9 Nikon Buckmaster scope. first $450 cash takes it. Live near Power and Pecos in Gilbert. Work in East Mesa. i also have another Ruger American I’m going to let go. A black 30-06 with an Sig 4-12 scope… just in case anyone is interested. Thanks!

Bergara B-14 HMR Wilderness 300 PRC. These Bergaras are Remington 700 clone actions so most 700 accessories work on them. This rifle has seen a couple trips to the range and around 50-60 rounds through it. Shooting right at .6 MOA. I’m sticking with my 7mm rifles and letting this big boy go. Still have boxes for rifle and scope. Comes with everything in the photos. There are 3 boxes of ammo and 3 boxes of brass (see pics). Here’s what she goes for new: Rifle - $1300 Zeiss bubble level rings - $200 Scope - $1300 Knock-off (Harris style) bipod - $30 Ammo and brass - $170-ish So about $3k plus tax new for close to $3300 total. Asking $1200 for the rifle, ammo and bipod. Or $2200 for the whole package. Thanks for looking!

Buyer was unable to make it into town today... so this package available again.

Surprised this didn’t go quick!

I emptied my inbox… should be able to receive pm now. Sorry about that!

I will try to see what's going on and get it fixed. In the mean time... you can text me at 480.688.887eight

I live in South Gilbert and work near Greenfield and the 60 in Mesa.