MulyHntr Report post Posted May 16 I need to develop loads for a couple of Browning 7mm-08’s I have. One is an X-Bolt, the other is a BAR mk3. What suggestions of bullets and weights do you have? Rifles and loads are to be used on Az Coues Whitetail and mule deer. I’m open to suggestions. Share this post Link to post Share on other sites
sherman Report post Posted May 16 I have a tx3 i use hornandy 139 gr sp the gave me the best results Share this post Link to post Share on other sites
Crazymonkey Report post Posted May 16 120 or 14 barns ttsx under a healthy dose of staball6.5 . Lapua brass and a 215m nets me 3090 from my 26 inch brux barrel custom . The 140 nets 3090 the test on 120's netted over 3200 Share this post Link to post Share on other sites
dusty Report post Posted May 17 Nosler 140 BT and 41.6 g varget, same for 140 partitions. Nosler 140 e=tips 1/2 moa with 39.0 g varget. 1 Share this post Link to post Share on other sites
PRDATR Report post Posted May 17 Varget is a very stable/consistent power. Just a bit too fast for me when I was reloading for it. I preferred IMR4064 as it filled the case more and gave better accuracy. Remington 700 Varmint Special 1: 9.25. Shot cloverleafs to 1/2" groups. AR15 was also right in there. Whatever powder works is going to lean more on the rifles twist then bullet selection. Share this post Link to post Share on other sites
